Take Classes


Anyone Can Take Classes at TechShop -- You Do NOT Need to Be a TechShop Member to Take Classes!

TechShop Mid-Peninsula Class Listings


View Class Listings at Our Other Locations Here >> Change TechShop Location

View the TechShop Mid-Peninsula Interactive Class Calendar Here >> MONTH-AT-A-GLANCE


Category:

 FABRICATION (FAB)
 
   
FAB107: Silicone RTV Moldmaking and Casting Basics

Learn how to work with silicone RTV (room temperature vulcanization), make a small mold using a plastic cup, see how more advanced molds are made, and even cast your own part in urethane resin!

In this introductory class, you will learn to make a silicone RTV mold from a small part or pre-made plug. You will makea single-sided mold of a quarter or other small, simple part. You will also examine two-sided mold making, adding registration "buttons" and slicing the mold. You will then cast resin in an RTV mold, learning tips and tricks to mixing and pouring resin and other substances to create final pieces from a silicone RTV mold.

Designed for the beginner, this class shows how easy it is to build molds with silicone RTV.

1 session currently scheduled:
    Silicone RTV Moldmaking and Casting Basics Saturday, 12/20/14 2:30 PM 2.0 Hours 4 SEATS TOTAL
3 SEATS LEFT
    * Member Sign Up $60.00 plus $20.00 Materials Fee
    Non-member Sign Up $75.00 plus $20.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
   
FAB108: Injection Molding SBU

The Morgan injection molding machine enables one to inexpensively fabricate from a few to many hundreds of identical parts molded from a large variety of thermoplastic materials.

In this Safety and Basic Use (SBU) class, you will have the opportunity to fabricate several different plastic parts using molds that illustrate a variety of molding techniques. Once you have been completed this basic class, you will have the knowledge to safely operate the machine and set it up for your own mold and material.

Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

1 session currently scheduled:
    Injection Molding SBU Monday, 12/22/14 11:00 AM 3.0 Hours 4 SEATS TOTAL
2 SEATS LEFT
    * Member Sign Up $90.00 plus $5.00 Materials Fee
    Non-member Sign Up $115.00 plus $5.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
   
FAB201: Carbon Fiber Basics

In this class, you will learn the basics of carbon fiber layup, then combine raw carbon fiber cloth, a strengthener and 2-part, high-strength epoxy to make your very own carbon fiber key fob and take it home with you.

This class focuses on the "compression molding" technique of carbon fiber fabrication, which you can easily use to make your own custom carbon fiber parts. You may also use a scroll saw to cut out a particular shape for your carbon fiber key fob. You'll be surprised how easy it is to do your own carbon fiber fabrication of all sorts of parts, and you'll want to use carbon fiber for many of your projects.

1 session currently scheduled:
    Carbon Fiber Basics Saturday, 12/20/14 11:00 AM 2.0 Hours 5 SEATS TOTAL
5 SEATS LEFT
    * Member Sign Up $60.00 plus $10.00 Materials Fee
    Non-member Sign Up $75.00 plus $10.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.