Take Classes


Anyone Can Take Classes at TechShop -- You Do NOT Need to Be a TechShop Member to Take Classes!

TechShop San Francisco Class Listings


View Class Listings at Our Other Locations Here >> Change TechShop Location

View the TechShop San Francisco Interactive Class Calendar Here >> MONTH-AT-A-GLANCE


Category:

 ARTS AND CRAFTS (ART)
 
   
ART103: Silk Screen Printing Basics - SBU

In this hands-on class, learn the basics of silkscreen printing. TechShop makes it easy by using vinyl stencils rather than photo-emulsion. Prepare a vinyl stencil, transfer onto a screen, apply ink to fabric through screen, and then heat set the ink. It’s that simple.

Want to print a t-shirt using your own artwork? Bring a simple black and white drawing that will be cut by hand. Participants who have passed the Vinyl Cutter Safety and Basic Use (SBU) class may bring in a pre-cut design to use. Otherwise, choose from several designs provided. Get ready to start making custom silkscreened t-shirts!

Project: Custom t-shirt or tote bag

Prerequisites: None

Equipment access: Silkscreen station

Minimum age: 12

Supervision requirements: During class, all 12- to 15-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

When using the silkscreen station outside of class time, 12- to 15-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

Safety: Closed-toed shoes are required.

Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

4 sessions currently scheduled:
    Silk Screen Printing Basics - SBU Sunday, 11/30/14 12:00 PM 3.0 Hours 4 SEATS TOTAL
CLASS FULL
    Silk Screen Printing Basics - SBU Sunday, 12/7/14 12:00 PM 3.0 Hours 4 SEATS TOTAL
4 SEATS LEFT
    * Member Sign Up $90.00 plus $10.00 Materials Fee
    Non-member Sign Up $115.00 plus $10.00 Materials Fee
    Silk Screen Printing Basics - SBU Sunday, 12/21/14 12:00 PM 3.0 Hours 4 SEATS TOTAL
4 SEATS LEFT
    * Member Sign Up $90.00 plus $10.00 Materials Fee
    Non-member Sign Up $115.00 plus $10.00 Materials Fee
    Silk Screen Printing Basics - SBU Sunday, 12/28/14 12:00 PM 3.0 Hours 4 SEATS TOTAL
4 SEATS LEFT
    * Member Sign Up $90.00 plus $10.00 Materials Fee
    Non-member Sign Up $115.00 plus $10.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
 AUTODESK (AUD)
 
   
AUD006: Autodesk Inventor - Basics

Learn how to navigate, sketch and model in Autodesk Inventor.

In this class, you will gain a basic understanding of parametric design; file types; dimensioning; geometric constraints; patterns; adding text; inserting image files; basic modeling including Extrude, Revolve, Loft and Sweep; assemblies; exporting your file and creating laser-able and CAMable files. The goal is to provide you with enough tools to use Inventor at a solid, basic level and to inspire you to seek out more advanced features such as simulation, mold making and sheet metal.

We will use the book, “Mastering Autodesk Inventor 2013,” to explain and teach concepts. For this reason, we strongly recommend that you purchase the book and bring it to class. For your convenience, it is available in the TechShop retail store.

TechShop members who take this class will receive $35 in store credit after the completion of the class.

3 sessions currently scheduled:
    Autodesk Inventor - Basics Monday, 12/1/14 7:00 PM 3.0 Hours 8 SEATS TOTAL
8 SEATS LEFT
    * Member Sign Up $35.00, No Materials Fee
    Non-member Sign Up $45.00, No Materials Fee
    Autodesk Inventor - Basics Wednesday, 12/17/14 7:00 PM 3.0 Hours 8 SEATS TOTAL
7 SEATS LEFT
    * Member Sign Up $35.00, No Materials Fee
    Non-member Sign Up $45.00, No Materials Fee
    Autodesk Inventor - Basics Monday, 12/29/14 7:00 PM 3.0 Hours 8 SEATS TOTAL
8 SEATS LEFT
    * Member Sign Up $35.00, No Materials Fee
    Non-member Sign Up $45.00, No Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
 CNC (CNC)
 
   
CNC101: Concepts of CNC

Learn the basics of CNC (computer numerical control) devices. This seminar will present the whole CNC process, from CAD (computer aided design) to CAM (computer aided machining) to CUT (cutting your part). Learn the essentials of calculating feeds and speeds. Understand the uses and differences between climb cutting and conventional cutting.

TechShop CNC Machining Series Overview

Learn the big picture

Concepts of CNC. Learn all the vocabulary and concepts needed to get the most out of the other classes in this series

Learn to translate your drawing into machine readable code

CAD to CAM - VCarve Pro and Cut3D. This class focuses on converting your CAD drawings into files for the ShopBot CNC router

CAD to CAM - InventorCAM Software. This class focuses on converting your CAD drawings into files for the Tormach CNC mill, but the software will also work on the ShopBot

Learn how to use the CNC machine - hands-on classes

CNC ShopBot CNC Router SBU

CNC Tormach CNC Mill SBU

Waterjet cutter

2 sessions currently scheduled:
    Concepts of CNC Saturday, 12/6/14 2:00 PM 2.0 Hours 25 SEATS TOTAL
25 SEATS LEFT
    * Member Sign Up $60.00, No Materials Fee
    Non-member Sign Up $75.00, No Materials Fee
    Concepts of CNC Saturday, 12/20/14 2:00 PM 2.0 Hours 25 SEATS TOTAL
25 SEATS LEFT
    * Member Sign Up $60.00, No Materials Fee
    Non-member Sign Up $75.00, No Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
   
CNC102: CNC Vinyl Cutter SBU

Learn to use the computer-controlled vinyl cutter in this Safety and Basic Use (SBU) class. Import vector (outline) designs from graphic software such as Adobe Illustrator and CorelDRAW into FlexiStarter, the software used to control the vinyl cutter. Next, use TechShop's CNC vinyl cutter to cut adhesive vinyl sheet into professional looking signage or ready-to-apply paint masking. This is a great tool for making screens for silkscreen printing, too!

Project: Vinyl sticker

Prerequisites

  • Required: Understanding of vector-based graphics

  • Recommended: COM201: Adobe Illustrator for CNC, COM207:CorelDraw for CNC

    Equipment access: Vinyl cutter

    Minimum age: 12

    Supervision requirements: During class, all 12- to 15-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

    When using the vinyl cutter outside of class time, 12- to 15-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

    Safety: Closed-toed shoes are mandatory.

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

  • 4 sessions currently scheduled:
        CNC Vinyl Cutter SBU Sunday, 11/30/14 10:00 AM 1.5 Hours 5 SEATS TOTAL
    2 SEATS LEFT
        * Member Sign Up $45.00 plus $5.00 Materials Fee
        Non-member Sign Up $55.00 plus $5.00 Materials Fee
        CNC Vinyl Cutter SBU Sunday, 12/7/14 10:00 AM 1.5 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $45.00 plus $5.00 Materials Fee
        Non-member Sign Up $55.00 plus $5.00 Materials Fee
        CNC Vinyl Cutter SBU Sunday, 12/21/14 10:00 AM 1.5 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $45.00 plus $5.00 Materials Fee
        Non-member Sign Up $55.00 plus $5.00 Materials Fee
        CNC Vinyl Cutter SBU Sunday, 12/28/14 10:00 AM 1.5 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $45.00 plus $5.00 Materials Fee
        Non-member Sign Up $55.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    CNC201: CAD/CAM Software - VCarve Pro and Cut3D

    In this information packed, hands-on, computer class you will learn the ins and outs of working with both VCarve Pro and Cut3D software packages.

    VCarve Pro is an easy-to-use CNC toolpath engine that generates precision toolpaths for virtually all CNC machines. You'll learn how to convert CAD DXF files and graphic designs into GCode-based CNC toolpaths for machining high quality parts and components.

    Cut3D is a dedicated toolpath engine for CNC machining 3D models that have been designed using a 3D CAD software such as Autodesk Inventor and other graphic design products. Cut3D's simple interface leads you step by step through the process of loading a model, setting the size, workholding, and calculating single, double- or four-sided roughing and finishing toolpaths. It will even allow you to virtually preview the results of your toolpath and then finally save the CNC code to run on your choice of machines.

    Upon successful completion of this class you will have the experience and knowledge necessary to enroll in any Level 3 CNC Machining Series class.

    4 sessions currently scheduled:
        CAD/CAM Software - VCarve Pro and Cut3D Saturday, 12/6/14 1:30 PM 3.0 Hours 6 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $90.00, No Materials Fee
        Non-member Sign Up $115.00, No Materials Fee
        CAD/CAM Software - VCarve Pro and Cut3D Saturday, 12/13/14 1:30 PM 3.0 Hours 6 SEATS TOTAL
    6 SEATS LEFT
        * Member Sign Up $90.00, No Materials Fee
        Non-member Sign Up $115.00, No Materials Fee
        CAD/CAM Software - VCarve Pro and Cut3D Monday, 12/15/14 5:00 PM 3.0 Hours 6 SEATS TOTAL
    6 SEATS LEFT
        * Member Sign Up $90.00, No Materials Fee
        Non-member Sign Up $115.00, No Materials Fee
        CAD/CAM Software - VCarve Pro and Cut3D Saturday, 12/20/14 1:30 PM 3.0 Hours 6 SEATS TOTAL
    6 SEATS LEFT
        * Member Sign Up $90.00, No Materials Fee
        Non-member Sign Up $115.00, No Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    CNC302: CNC ShopBot SBU

    In this Safety and Basic Use (SBU) class, learn to use the computer-controlled (CNC) ShopBot router to cut objects, parts or art designed in 2D or 3D CAD. This powerful tool is perfect for rapid prototyping and digital fabrication. Create parts with complex curves and surfaces from most woods, plastics, foams, and other composites (no metal on this machine). This class teaches the use of the machine, but does not cover CAD drawing or toolpathing. VCarve Pro (CNC 201) is a good starting point for people new to CAD and CAM.

    Materials fee: Includes materials for the class project and a router bit for each student to keep.

    Project: Wooden gear

    Prerequisites Use of CAD and CAM software like VCarve Pro - CNC 201, Basic Woodshop SBU - WOD101 are recommended.

    Equipment access: CNC ShopBot Router

    Minimum age: 16

    Supervision requirements: During class, 16- and 17-year-old -year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

    When using the CNC ShopBot outside of class time, 16- and 17-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

    Safety

  • Mandatory: Closed-toed shoes, eye protection, short sleeves

  • Advisable: Hearing protection, particle filter or dust mask

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

  • 8 sessions currently scheduled:
        CNC ShopBot SBU Saturday, 11/29/14 3:00 PM 3.0 Hours 5 SEATS TOTAL
    CLASS FULL
        CNC ShopBot SBU Saturday, 12/6/14 10:00 AM 3.0 Hours 5 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $90.00 plus $20.00 Materials Fee
        Non-member Sign Up $115.00 plus $20.00 Materials Fee
        CNC ShopBot SBU Monday, 12/8/14 5:30 PM 3.0 Hours 5 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $90.00 plus $20.00 Materials Fee
        Non-member Sign Up $115.00 plus $20.00 Materials Fee
        CNC ShopBot SBU Saturday, 12/13/14 10:00 AM 3.0 Hours 5 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $90.00 plus $20.00 Materials Fee
        Non-member Sign Up $115.00 plus $20.00 Materials Fee
        CNC ShopBot SBU Tuesday, 12/16/14 5:30 PM 3.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $90.00 plus $20.00 Materials Fee
        Non-member Sign Up $115.00 plus $20.00 Materials Fee
        CNC ShopBot SBU Saturday, 12/20/14 10:00 AM 3.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $90.00 plus $20.00 Materials Fee
        Non-member Sign Up $115.00 plus $20.00 Materials Fee
        CNC ShopBot SBU Saturday, 12/27/14 3:30 PM 3.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $90.00 plus $20.00 Materials Fee
        Non-member Sign Up $115.00 plus $20.00 Materials Fee
        CNC ShopBot SBU Monday, 12/29/14 12:00 PM 3.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $90.00 plus $20.00 Materials Fee
        Non-member Sign Up $115.00 plus $20.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    CNC301: CNC Tormach Milling Machine SBU

    In this class, learn to use the CNC (computer-controlled) mill. This machine is the perfect combination of precision and power for any prototyping or hobby milling needs. Learn to convert G-code (created in InventorCAM, Cut 3D or VCarve Pro) into actual parts made from aluminum, steel, and even titanium.

    Materials fee:
    Includes materials for the class project and a router bit for each student to keep.

    Project: Bottle opener

    Prerequisites: CAD experience, ability to create G-code, and experience with conventional milling are recommended.

    Equipment access: CNC milling machine

    Minimum age: 16

    Supervision requirements: During class, all 16- and 17-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

    When using the CNC mill outside of class time, 16- and 17-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

    Safety

  • Mandatory: Closed-toed shoes, eye protection, and short sleeves. Tie hair back or secure under a cap and remove all jewelry.

  • Advisable: Hearing protection.

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

  • 4 sessions currently scheduled:
        CNC Tormach Milling Machine SBU Tuesday, 12/2/14 5:00 PM 3.0 Hours 5 SEATS TOTAL
    CLASS FULL
        CNC Tormach Milling Machine SBU Monday, 12/8/14 5:00 PM 3.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $90.00 plus $25.00 Materials Fee
        Non-member Sign Up $115.00 plus $25.00 Materials Fee
        CNC Tormach Milling Machine SBU Thursday, 12/18/14 5:00 PM 3.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $90.00 plus $25.00 Materials Fee
        Non-member Sign Up $115.00 plus $25.00 Materials Fee
        CNC Tormach Milling Machine SBU Tuesday, 12/23/14 5:00 PM 3.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $90.00 plus $25.00 Materials Fee
        Non-member Sign Up $115.00 plus $25.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    CNC310: CAD/CAM Software - InventorCAM

    InventorCAM is the next level CAM program offered by TechShop, supporting multiple-axis machining, both 2.5D and 3D feature cut path generation, and high levels of control over the cutting paths generated. It has the powerful benefit of being directly embedded into Autodesk Inventor so users can easily switch back to creating or adjusting their part and the toolpaths automatically reflecting the changes.

    InventorCAM's highly intuitive user interface allows toolpath generation to be as simple or as complex as users want it to be, with equal level of control over the geometry and makeup of cutting tools. It is the optimum tool for the intermediate to advanced TechShop CNC machinist.

    In this class, students will follow the instructor step by step in creating toolpaths for half of a feature-rich part, then solidify their knowledge by creating the toolpaths for the other half with instructor guidance.

    Prerequisites: This CAM works with Inventor to create GCode; you must be able to use Autodesk Inventor before signing up for this class.

    In order to get the most out of this class, we recommend that students be familiar with TechShop's first-level CAM programs from Vectric: VCarve and Cut3D as well as have experience using the Tormach or the ShopBot. Introductory topics such as feeds and speeds, zeroing machines appropriately according to defined zeros in the CAM program, workholding, and loading exported toolpaths into the machines will not be reviewed.

    1 session currently scheduled:
        CAD/CAM Software - InventorCAM Monday, 12/22/14 7:00 PM 3.0 Hours 8 SEATS TOTAL
    8 SEATS LEFT
        * Member Sign Up $60.00, No Materials Fee
        Non-member Sign Up $75.00, No Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    CNC401: CNC Waterjet Cutter SBU

    In this Safety and Basic Use (SBU) class, learn to safely operate the waterjet cutter, one of the most powerful tools at TechShop.

    Precisely cut almost any flat material with a very thin, high pressure stream of water and abrasive garnet. Work with everything from the thinnest sheet metal to 8 inches of granite, as well as wood, glass, tile, marble, and more. This extremely versatile, easy-to-program, and low-waste machine works without the risk of heat damage. The large bed accommodates full sheets of material.

    Class time is split between learning the FlowPath software and using the waterjet.

    Note: When using the FlowJet, a consumables fee will be charged, only for cutting time, not setup time. The waterjet cuts quickly and cost estimate strategies will be covered.

    Project: Gear-shaped bottle opener

    Prerequisites

  • Required: Understanding of vector-based graphics

  • Recommended: CAD to CAM experience

    Equipment access: Waterjet cutter

    Minimum age: 16

    Supervision requirements: During class, all 16- and 17-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

    When using the waterjet outside of class time, 16- and 17-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

    Safety

  • Mandatory: Closed-toed shoes, eye protection

  • Advisable: Hearing protection

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

  • 5 sessions currently scheduled:
        CNC Waterjet Cutter SBU Saturday, 11/29/14 10:00 AM 4.0 Hours 4 SEATS TOTAL
    CLASS FULL
        CNC Waterjet Cutter SBU Saturday, 12/6/14 10:00 AM 4.0 Hours 4 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $185.00 plus $10.00 Materials Fee
        Non-member Sign Up $230.00 plus $10.00 Materials Fee
        CNC Waterjet Cutter SBU Saturday, 12/13/14 10:00 AM 4.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $185.00 plus $10.00 Materials Fee
        Non-member Sign Up $230.00 plus $10.00 Materials Fee
        CNC Waterjet Cutter SBU Saturday, 12/20/14 10:00 AM 4.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $185.00 plus $10.00 Materials Fee
        Non-member Sign Up $230.00 plus $10.00 Materials Fee
        CNC Waterjet Cutter SBU Saturday, 12/27/14 10:00 AM 4.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $185.00 plus $10.00 Materials Fee
        Non-member Sign Up $230.00 plus $10.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
     COMPUTERS (COM)
     
       
    COM201: Adobe Illustrator for CNC

    Makers and designers alike agree that vector drawing is the starting point of all CNC fabrication.

    Adobe Illustrator is an extremely powerful 2D vector graphics drawing program -- almost any product or invention that you imagine can begin in Illustrator. By following the pathways offered in this class, you will be able to export your files to any of the CNC machines in the TechShop arsenal.

    In this class, you will learn the basics of the interface and navigation, effective drawing techniques, converting bitmaps to vectors in one step, creating clean and optimized vectors, and the most efficient techniques to prepare your files for CNC operations. You will also learn how each of the CNC machines at TechShop will work with your file to create your projects.

    This class provides the foundation of skills for the following classes: CNC Concepts, CAD / CAM, ShopBot SBU, Tormach SBU, CNC Vinyl Cutter SBU, Laser Cutter SBU, and Waterjet SBU.

    Prerequisite: A working knowledge of Windows operating environment!

    2 sessions currently scheduled:
        Adobe Illustrator for CNC Wednesday, 12/3/14 5:00 PM 3.0 Hours 8 SEATS TOTAL
    8 SEATS LEFT
        * Member Sign Up $50.00, No Materials Fee
        Non-member Sign Up $65.00, No Materials Fee
        Adobe Illustrator for CNC Tuesday, 12/23/14 5:00 PM 3.0 Hours 8 SEATS TOTAL
    8 SEATS LEFT
        * Member Sign Up $50.00, No Materials Fee
        Non-member Sign Up $65.00, No Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
     FABRICATION (FAB)
     
       
    FAB105: Vacuum Forming SBU

    Lots of parts can be made quickly and inexpensively with the use of a vacuum forming system.

    In this Safety and Basic Use class, you will learn the parts of the vacuum forming machine and then make vacuum-formed parts. You will make a master (plug) tool from inexpensive materials like pine, foam, balsa or found objects; select plastic sheeting; and then use the created part as a "plug" to mold the final object from a heated plastic sheet with the assistance of atmospheric pressure.

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    2 sessions currently scheduled:
        Vacuum Forming SBU Wednesday, 12/3/14 7:30 PM 2.0 Hours 4 SEATS TOTAL
    2 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Vacuum Forming SBU Wednesday, 12/17/14 7:30 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    FAB106: Sand Blasting and Powder Coating SBU

    Powder coating is a durable, simple to apply, easy to clean up, product. It is inexpensive, and more environmentally friendly than paint, as it has no VOCs and no solvents are used. The final product is more durable than paint, and powder is available in many colors and finish types.

    The sand blaster can be used on metal, wood, glass, mirror, plastics and almost any material that is rigid. It will remove paint, rust and mill scale, as well as cleaning welds. (The parts must be baked at about 400 degrees for 15 minutes, so it will not work on magnetic items, or anything with grease in the part, like bearings.)

    In this Safety and Basic Use class, you will learn how to use a cabinet sandblaster to prepare a small metal part, clean and coat it with powder, and then bake it on in the powder coat oven. There is only time in class for sandblasting steel and aluminum parts.

    Note: The sandblast cabinet and powder coating oven are large enough for motorcycle frames, bicycles and many other bulky items. Please visit your local TechShop and check the oven size if you have a specific project in mind.

    Because of possible shock (high voltage, low amperage) with a powder coating gun, members with a pacemaker, or any voltage sensitive medical equipment are not allowed to take this course or use the equipment.

    Once you have taken and successfully passed this class, you will be cleared to use the sandblasting cabinet, powder coating gun, powder spray booth, and powder coating oven.

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    5 sessions currently scheduled:
        Sand Blasting and Powder Coating SBU Thursday, 12/4/14 7:30 PM 2.0 Hours 4 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Sand Blasting and Powder Coating SBU Monday, 12/8/14 7:30 PM 2.0 Hours 4 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Sand Blasting and Powder Coating SBU Thursday, 12/18/14 7:30 PM 2.0 Hours 4 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Sand Blasting and Powder Coating SBU Monday, 12/22/14 7:30 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Sand Blasting and Powder Coating SBU Wednesday, 12/31/14 7:30 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    FAB107: Silicone RTV Moldmaking and Casting Basics

    Learn how to work with silicone RTV (room temperature vulcanization), make a small mold using a plastic cup, see how more advanced molds are made, and even cast your own part in urethane resin!

    In this introductory class, you will learn to make a silicone RTV mold from a small part or pre-made plug. You will makea single-sided mold of a quarter or other small, simple part. You will also examine two-sided mold making, adding registration "buttons" and slicing the mold. You will then cast resin in an RTV mold, learning tips and tricks to mixing and pouring resin and other substances to create final pieces from a silicone RTV mold.

    Designed for the beginner, this class shows how easy it is to build molds with silicone RTV.

    2 sessions currently scheduled:
        Silicone RTV Moldmaking and Casting Basics Friday, 12/5/14 7:30 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $20.00 Materials Fee
        Non-member Sign Up $75.00 plus $20.00 Materials Fee
        Silicone RTV Moldmaking and Casting Basics Tuesday, 12/23/14 7:30 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $20.00 Materials Fee
        Non-member Sign Up $75.00 plus $20.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    FAB108: Injection Molding SBU

    The Morgan injection molding machine enables one to inexpensively fabricate from a few to many hundreds of identical parts molded from a large variety of thermoplastic materials.

    In this Safety and Basic Use (SBU) class, you will have the opportunity to fabricate several different plastic parts using molds that illustrate a variety of molding techniques. Once you have been completed this basic class, you will have the knowledge to safely operate the machine and set it up for your own mold and material.

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    2 sessions currently scheduled:
        Injection Molding SBU Saturday, 12/13/14 2:00 PM 3.0 Hours 4 SEATS TOTAL
    1 SEAT LEFT
        * Member Sign Up $90.00 plus $5.00 Materials Fee
        Non-member Sign Up $115.00 plus $5.00 Materials Fee
        Injection Molding SBU Friday, 12/19/14 12:00 PM 3.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $90.00 plus $5.00 Materials Fee
        Non-member Sign Up $115.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    FAB201: Carbon Fiber Basics

    In this class, you will learn the basics of carbon fiber layup, then combine raw carbon fiber cloth, a strengthener and 2-part, high-strength epoxy to make your very own carbon fiber key fob and take it home with you.

    This class focuses on the "compression molding" technique of carbon fiber fabrication, which you can easily use to make your own custom carbon fiber parts. You may also use a scroll saw to cut out a particular shape for your carbon fiber key fob. You'll be surprised how easy it is to do your own carbon fiber fabrication of all sorts of parts, and you'll want to use carbon fiber for many of your projects.

    2 sessions currently scheduled:
        Carbon Fiber Basics Friday, 12/12/14 7:30 PM 2.0 Hours 5 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $10.00 Materials Fee
        Non-member Sign Up $75.00 plus $10.00 Materials Fee
        Carbon Fiber Basics Tuesday, 12/30/14 7:30 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $60.00 plus $10.00 Materials Fee
        Non-member Sign Up $75.00 plus $10.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
     LASER CUTTING (LAS)
     
       
    LAS101: Laser Cutting & Etching SBU - Epilog

    Learn how to use a laser cutter to cut, etch, and engrave designs in a variety of materials up to 24" x 18" and up to 3/8" thick in this Safety and Basic Use (SBU) class. Work with acrylic, wood, paper, cardboard, fabric, leather, and even chocolate! Using graphics software like Adobe Illustrator or CorelDRAW, cut intricate designs and engrave highly detailed images at the touch of a button. The sky is the limit with this simple and versatile tool.

    Project: Etch a custom dog tag

    Prerequisite(s): None. However, familiarity with graphics software will be helpful.

    Equipment access: Laser cutter

    Minimum age: 12 years

    Supervision requirements: During class, all 12- to 15-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

    When using the laser cutter outside of class time, 12- to 15-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

    Safety: Closed-toed shoes are mandatory.

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    8 sessions currently scheduled:
        Laser Cutting & Etching SBU - Epilog Saturday, 11/29/14 10:00 AM 2.0 Hours 6 SEATS TOTAL
    CLASS FULL
        Laser Cutting & Etching SBU - Epilog Tuesday, 12/2/14 5:00 PM 2.0 Hours 6 SEATS TOTAL
    CLASS FULL
        Laser Cutting & Etching SBU - Epilog Saturday, 12/6/14 12:30 PM 2.0 Hours 6 SEATS TOTAL
    2 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Laser Cutting & Etching SBU - Epilog Tuesday, 12/9/14 5:00 PM 2.0 Hours 6 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Laser Cutting & Etching SBU - Epilog Saturday, 12/13/14 12:30 PM 2.0 Hours 6 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Laser Cutting & Etching SBU - Epilog Tuesday, 12/16/14 5:00 PM 2.0 Hours 6 SEATS TOTAL
    6 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Laser Cutting & Etching SBU - Epilog Saturday, 12/20/14 12:30 PM 2.0 Hours 6 SEATS TOTAL
    6 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Laser Cutting & Etching SBU - Epilog Saturday, 12/27/14 10:00 AM 2.0 Hours 6 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    LAS102: Laser Cutting and Etching SBU - Trotec

    Learn how to use a laser cutter to cut, etch, and engrave designs in a variety of materials up to 28" x 17" and up to 3/8" thick in this Safety and Basic Use (SBU) class. Work with acrylic, wood, paper, cardboard, fabric, leather, and even chocolate! Using graphics software like Adobe Illustrator or CorelDRAW, cut intricate designs and engrave highly detailed images at the touch of a button. The sky is the limit with this simple and versatile tool.

    Project: Etch a custom dog tag

    Prerequisite(s): None. However, familiarity with graphics software will be helpful

    Equipment access: Laser cutter

    Minimum age: 12

    Supervision requirements: During class, all 12- to 15-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

    When using the laser cutter outside of class time, 12- to 15-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

    Safety: Closed-toed shoes are mandatory.

    There is a $15 per hour fee for using this equipment.

    It must be purchased in advance, and is non-refundable.


    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    5 sessions currently scheduled:
        Laser Cutting and Etching SBU - Trotec Monday, 12/8/14 5:30 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Laser Cutting and Etching SBU - Trotec Saturday, 12/13/14 3:00 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Laser Cutting and Etching SBU - Trotec Saturday, 12/20/14 3:00 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Laser Cutting and Etching SBU - Trotec Saturday, 12/27/14 12:30 PM 2.0 Hours 4 SEATS TOTAL
    2 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Laser Cutting and Etching SBU - Trotec Tuesday, 12/30/14 7:30 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    LAS201: Laser Engraver Rotary Attachment SBU - Epilog

    Learn how to use the laser cutter’s rotary attachment in this Safety and Basic Use (SBU) class. The rotary attachment allows laser etching on cylindrical objects such as wine glasses, beer mugs, flashlights, bottles, and even drumsticks. Imagine the possibilities!

    Project: Etch a design into a drinking glass

    Prerequisite(s): LAS101 Laser Cutting and Etching SBU

    Equipment access: Laser engraver rotary attachment

    Minimum age: 12 years

    Supervision requirements: During class, all 12- to 15-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

    When using the laser rotary attachment outside of class time, 12- to 15-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

    Safety: Closed-toed shoes are mandatory.

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    3 sessions currently scheduled:
        Laser Engraver Rotary Attachment SBU - Epilog Tuesday, 12/9/14 7:30 PM 2.0 Hours 6 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Laser Engraver Rotary Attachment SBU - Epilog Tuesday, 12/16/14 7:30 PM 2.0 Hours 6 SEATS TOTAL
    6 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Laser Engraver Rotary Attachment SBU - Epilog Tuesday, 12/30/14 5:00 PM 2.0 Hours 6 SEATS TOTAL
    6 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    LAS202: Laser Engraver Rotary Attachment SBU - Trotec

    Learn how to use the laser cutter’s rotary attachment in this Safety and Basic Use (SBU) class. The rotary attachment allows laser etching on cylindrical objects such as wine glasses, beer mugs, flashlights, bottles, and even drumsticks. Imagine the possibilities!

    Project: Etch a design into a drinking glass

    Prerequisite(s): LAS101 Laser Cutting and Etching SBU

    Equipment access: Laser engraver rotary attachment

    Minimum age: 12 years

    Supervision requirements: During class, all 12- to 15-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

    When using the laser engraver rotary attachment outside of class time, 12- to 15-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

    Safety: Closed-toed shoes are mandatory.

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    1 session currently scheduled:
        Laser Engraver Rotary Attachment SBU - Trotec Thursday, 12/4/14 5:00 PM 2.0 Hours 6 SEATS TOTAL
    6 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    LAS205: Advanced Laser Cutting and Etching Techniques - Epilog

    Have you already passed the Laser Cutter Safety and Basic Use class and want to take your laser skills to the next level? How would you like to be better prepared and more efficient with your time on the laser?

    In this class, we will build upon what you've already learned from your laser cutting experiences. You will learn how to quickly dial in the perfect settings for etching on any new material, set up complex jobs with multiple sets of settings, use color mapping and the powerful stamp and 3D modes for amazing effects. We will also cover how to use the print driver in ingenious ways.

    Your take-home class project will be a folding octahedron box.

    2 sessions currently scheduled:
        Advanced Laser Cutting and Etching Techniques - Epilog Thursday, 12/4/14 7:30 PM 2.0 Hours 5 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Advanced Laser Cutting and Etching Techniques - Epilog Wednesday, 12/17/14 7:30 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
     MACHINING (MAC)
     
       
    MAC101: Milling Machine SBU

    In this Safety and Basic Use (SBU) class, learn basic operations of the vertical milling machine to safely select speeds, change end mills, use the digital readout, and secure work needed to accurately machine parts. Explore the theory of how to successfully choose the correct end mill and speed setting. Work precisely with metal and plastics to cut, drill and surface parts.

    Project: Aluminum business card holder

    Prerequisite(s): None. However, MTL103, Basic Metal Shop is recommended.

    Equipment access: Milling machine

    Minimum age: 16

    Supervision requirements: During class, all 16- and 17-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

    When using the mill outside of class time, 16- and 17-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

    Safety

  • Mandatory: Closed-toed shoes, eye protection, and short sleeves. Tie hair back or secure under a cap and remove all jewelry.

  • Advisable: Hearing protection

    Materials fee: The materials fee includes materials for the class project, and an end mill for each student to keep.

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

  • 3 sessions currently scheduled:
        Milling Machine SBU Friday, 12/5/14 5:00 PM 3.0 Hours 5 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $90.00 plus $25.00 Materials Fee
        Non-member Sign Up $125.00 plus $25.00 Materials Fee
        Milling Machine SBU Thursday, 12/11/14 5:00 PM 3.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $90.00 plus $25.00 Materials Fee
        Non-member Sign Up $125.00 plus $25.00 Materials Fee
        Milling Machine SBU Monday, 12/15/14 5:00 PM 3.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $90.00 plus $25.00 Materials Fee
        Non-member Sign Up $125.00 plus $25.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    MAC102: Metal Lathe SBU

    The lathe is used to create detailed cylindrical or tapered objects in plastic or metal. In this Safety and Basic Use course (SBU), learn the basic operations of metal turning on the lathe to safely select speeds, select and change cutting tools, use the digital readout, and secure work to make accurate cuts. Explore the theory of how to choose the correct cutter and speed setting.

    Project: Aluminum refrigerator magnet

    Prerequisite(s): None. However, knowledge of basic metal shop tools is recommended

    Equipment access: Metal lathe

    Minimum age: 16

    Supervision requirements: During class, all 16- and 17-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

    When using the metal lathe outside of class time, 16- and 17-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

    Safety

  • Mandatory: Closed-toed shoes, eye protection, and short sleeves. Tie hair back or secure under a cap and remove all jewelry.

  • Advisable: Hearing protection

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

  • 3 sessions currently scheduled:
        Metal Lathe SBU Thursday, 12/4/14 6:00 PM 3.0 Hours 5 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $90.00 plus $5.00 Materials Fee
        Non-member Sign Up $115.00 plus $5.00 Materials Fee
        Metal Lathe SBU Wednesday, 12/10/14 6:00 PM 3.0 Hours 5 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $90.00 plus $5.00 Materials Fee
        Non-member Sign Up $115.00 plus $5.00 Materials Fee
        Metal Lathe SBU Tuesday, 12/16/14 6:00 PM 3.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $90.00 plus $5.00 Materials Fee
        Non-member Sign Up $115.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    MAC201: Advanced Milling Machine - Tramming and Precision

    In this advanced skills class, learn the art of tramming, how to make sure the mill and vise are exactly plumb and parallel, and how to precisely square up work. Confidently use a dial test indicator, 1-2-3 block, fly cutter, and deburring stone. Leave with the skill to mill flat and square projects to a very high degree of accuracy. With practice and patience, become a more accurate machinist and competent mill user!

    Project: Square an aluminum part

    Prerequisite(s):

  • Required: MAC101: Milling Machine SBU

  • Recommended: At least 10 hours of mill experience

    Minimum age: 16

    Supervision requirements: All 16- to 17-year-olds must attend class with a parent or guardian and be supervised, while using the mill, by a parent or guardian who has passed the SBU.

    Safety

  • Required: Closed-toed shoes, eye protection, and short sleeves. Tie hair back or secure under a cap and remove jewelry.

  • Recommended: Hearing protection

  • 1 session currently scheduled:
        Advanced Milling Machine - Tramming and Precision Friday, 12/12/14 12:00 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $70.00 plus $5.00 Materials Fee
        Non-member Sign Up $90.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    MAC205: Advanced Metal Lathe - Knurling and Threading

    Using a metal lathe to create custom threads for bolts, nuts or any custom application can seem like a daunting and complex machining operation.

    This class breaks down the process and clearly explains the concepts and techniques of threading. You will learn about the different types of tools used for threading, anatomy and nomenclature of threads, and the step-by-step process to machining any kind of thread. We will also cover the process of knurling parts to create texture for gripping.

    This class is a great way to learn a fundamental lathe skill-set and increase your overall comfort with lathes and what can be created with them.

    Prerequisite:/b> You must have successfully completed the Metal Lathe SBU to take this course.

    1 session currently scheduled:
        Advanced Metal Lathe - Knurling and Threading Monday, 12/15/14 6:30 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $60.00 plus $10.00 Materials Fee
        Non-member Sign Up $75.00 plus $10.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
     METAL SHOP (MTL)
     
       
    MTL103: Basic Metal Shop SBU

    In this Safety and Basic Use (SBU) class, learn to use the cutting and shaping tools most commonly needed when working with metal. The tools work best on materials at least 1/8” thick, but some will work on thinner material as well. These tools are designed to work with steel and aluminum. Get hands-on experience using the vertical and horizontal band saw, cold saw, drill press, pedestal grinder, and disc sander.

    This class is the perfect companion to the mill, lathe and welding classes.

    Project: Metal bottle opener

    Prerequisite(s): None

    Equipment access: Vertical and horizontal band saw, cold saw, drill press, pedestal grinder, and disc sander

    Minimum age: 16

    Supervision requirement: None

    Safety

  • Mandatory: Closed-toed shoes, eye protection, and short sleeves. Pull back hair, no jewelry,no gloves.

  • Advisable: Hearing protection

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

  • 9 sessions currently scheduled:
        Basic Metal Shop SBU Saturday, 11/29/14 3:30 PM 2.0 Hours 5 SEATS TOTAL
    2 SEATS LEFT
        * Member Sign Up $65.00 plus $10.00 Materials Fee
        Non-member Sign Up $80.00 plus $10.00 Materials Fee
        Basic Metal Shop SBU Friday, 12/5/14 7:30 PM 2.0 Hours 4 SEATS TOTAL
    CLASS FULL
        Basic Metal Shop SBU Saturday, 12/6/14 10:30 AM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $65.00 plus $10.00 Materials Fee
        Non-member Sign Up $80.00 plus $10.00 Materials Fee
        Basic Metal Shop SBU Tuesday, 12/9/14 5:00 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $65.00 plus $10.00 Materials Fee
        Non-member Sign Up $80.00 plus $10.00 Materials Fee
        Basic Metal Shop SBU Saturday, 12/13/14 10:30 AM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $65.00 plus $10.00 Materials Fee
        Non-member Sign Up $80.00 plus $10.00 Materials Fee
        Basic Metal Shop SBU Wednesday, 12/17/14 5:00 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $65.00 plus $10.00 Materials Fee
        Non-member Sign Up $80.00 plus $10.00 Materials Fee
        Basic Metal Shop SBU Saturday, 12/20/14 10:30 AM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $65.00 plus $10.00 Materials Fee
        Non-member Sign Up $80.00 plus $10.00 Materials Fee
        Basic Metal Shop SBU Saturday, 12/27/14 10:30 AM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $65.00 plus $10.00 Materials Fee
        Non-member Sign Up $80.00 plus $10.00 Materials Fee
        Basic Metal Shop SBU Tuesday, 12/30/14 5:00 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $65.00 plus $10.00 Materials Fee
        Non-member Sign Up $80.00 plus $10.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    MTL104: Sheet Metal Basics SBU

    Learn to safely use the tools most commonly needed to work with sheet metal. Get first-hand experience using the hydraulic shear, turret punch, slitting shear, corner notcher, finger brake (also called a box brake or pan brake) and spot welder in this Safety and Basic Use (SBU) class. Gain the knowledge to shear (cut), fold, bend, and punch holes in sheet metal.

    Project: Small sheet metal box

    Prerequisite(s): None

    Equipment access: Hydraulic shear, turret punch, slitting shear (hand shear) corner notcher, finger brake, and spot welder

    Note: These tools cannot be used to make curved surfaces or work with metal thicker than 16 gauge mild steel or aluminum.

    Minimum age: 12

    Supervision requirements: During class, all 12- to 15-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

    When using these tools outside of class time, 12- to 15-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

    Safety

  • Mandatory: Closed-toed shoes, eye protection

  • Advised: Hearing protection

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

  • 4 sessions currently scheduled:
        Sheet Metal Basics SBU Tuesday, 12/2/14 5:00 PM 2.0 Hours 5 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $65.00 plus $10.00 Materials Fee
        Non-member Sign Up $80.00 plus $10.00 Materials Fee
        Sheet Metal Basics SBU Saturday, 12/13/14 1:00 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $65.00 plus $10.00 Materials Fee
        Non-member Sign Up $80.00 plus $10.00 Materials Fee
        Sheet Metal Basics SBU Saturday, 12/20/14 1:00 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $65.00 plus $10.00 Materials Fee
        Non-member Sign Up $80.00 plus $10.00 Materials Fee
        Sheet Metal Basics SBU Tuesday, 12/23/14 5:00 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $65.00 plus $10.00 Materials Fee
        Non-member Sign Up $80.00 plus $10.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    MTL201: Sheet Metal - Organic Shapes SBU

    Learn to safely work with sheet metal to form curved shapes in this Safety and Basic Use (SBU) class. Receive hands-on practice with the slip roll, English wheel, planishing hammer, metal shrinker and stretcher, Beverly shear, shot bags, and hammers. Practice these basics techniques and create motorcycle gas tanks, fenders, curved panels, and more!

    Project: Turtle shell-shaped piece of aluminum with a beaded edge

    Prerequisite(s): MTL104 Sheet Metal Basics SBU is recommended

    Equipment access: Slip roll, English wheel, planishing hammer, metal shrinker and stretcher, Beverly shear, shot bags, and hammers. Note: These tools are not used to work with metal thicker than 16 gauge mild steel or aluminum.

    Minimum age: 12

    Supervision requirements: During class, all 12- to 15-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

    When using these tools outside of class time, 12- to 15-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

    Safety

  • Mandatory: Closed-toed shoes, eye protection

  • Advisable: Hearing protection

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

  • 3 sessions currently scheduled:
        Sheet Metal - Organic Shapes SBU Tuesday, 12/9/14 7:30 PM 2.0 Hours 5 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $65.00 plus $10.00 Materials Fee
        Non-member Sign Up $80.00 plus $10.00 Materials Fee
        Sheet Metal - Organic Shapes SBU Wednesday, 12/17/14 7:30 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $65.00 plus $10.00 Materials Fee
        Non-member Sign Up $80.00 plus $10.00 Materials Fee
        Sheet Metal - Organic Shapes SBU Tuesday, 12/30/14 7:30 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $65.00 plus $10.00 Materials Fee
        Non-member Sign Up $80.00 plus $10.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
     RAPID PROTOTYPING (PRO)
     
       
    PRO201: 3D Printing: Type A Machines SBU

    3D printing allows you to quickly and easily create a physical object from a computer model, literally printing thin layers of the part one at a time. This is an easy way to prototype parts for machining or injection molding, or just making one-off parts out of convenience.

    In this class, you will learn how to import, prepare, and print three-dimensional parts using the Series 1 3D printer from Type A Machines. With the largest build-space available at TechShop, the Series 1 can print larger objects than are possible with other 3D printers.

    The class will print a small part that TechShop has designed.

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    This class will not be transferable to or from the MakerBot classes for reservations.

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    6 sessions currently scheduled:
        3D Printing: Type A Machines SBU
    (3D printing: Type A Machine SBU)
    Sunday, 11/30/14 11:00 AM 2.5 Hours 6 SEATS TOTAL
    CLASS FULL
        3D Printing: Type A Machines SBU
    (3D printing: Type A Machine SBU)
    Thursday, 12/4/14 5:00 PM 2.5 Hours 6 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $70.00 plus $5.00 Materials Fee
        Non-member Sign Up $90.00 plus $5.00 Materials Fee
        3D Printing: Type A Machines SBU
    (3D printing: Type A Machine SBU)
    Sunday, 12/7/14 10:00 AM 2.5 Hours 6 SEATS TOTAL
    6 SEATS LEFT
        * Member Sign Up $70.00 plus $5.00 Materials Fee
        Non-member Sign Up $90.00 plus $5.00 Materials Fee
        3D Printing: Type A Machines SBU
    (3D printing: Type A Machine SBU)
    Sunday, 12/14/14 10:00 AM 2.5 Hours 6 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $70.00 plus $5.00 Materials Fee
        Non-member Sign Up $90.00 plus $5.00 Materials Fee
        3D Printing: Type A Machines SBU
    (3D printing: Type A Machine SBU)
    Thursday, 12/18/14 6:00 PM 2.5 Hours 6 SEATS TOTAL
    6 SEATS LEFT
        * Member Sign Up $70.00 plus $5.00 Materials Fee
        Non-member Sign Up $90.00 plus $5.00 Materials Fee
        3D Printing: Type A Machines SBU
    (3D printing: Type A Machine SBU)
    Sunday, 12/28/14 10:00 AM 2.5 Hours 6 SEATS TOTAL
    6 SEATS LEFT
        * Member Sign Up $70.00 plus $5.00 Materials Fee
        Non-member Sign Up $90.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    PRO301: Intermediate 3D Printing Workshop and SBU

    Are you ready to print in 3D on a Type A Series 1 3D Printer at the Techshop in San Francisco ? If you are excited about 3D printing at the Techshop and you would like to get a solid overview of how to print in 3D, how to print in multiple colors, 3D printing Jewelry, and intermediate 3D printing software concepts then please join the Intermediate 3D Printing Workshop and SBU. The purpose of this class is to provide an extended overview to students who are already familiar with the basics of 3D printing. Students who take this class will receive all of the information in the regular SBU class and an extra 90 minute review of intermediate level 3D printing.

    Students are encouraged to bring their own 3D models in STL format to get the most from the learning experience.

    3D Printing at Techshop

    3D Printing with a Type A Machines Series 1 Printer

    3D Printing in Multiple Colors

    Overview of 3D Printing Jewelry

    Intermediate 3D Printing Software concepts

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    1 session currently scheduled:
        Intermediate 3D Printing Workshop and SBU
    (Intermediate 3D Printing Workshop and SBU)
    Sunday, 12/21/14 10:00 AM 4.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $100.00 plus $20.00 Materials Fee
        Non-member Sign Up $125.00 plus $20.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
     TECHNOLOGY (TEC)
     
       
    TEC108: Magnet Printing SBU

    Learn how to make a new type of magnet with the MagPrinter. This machine turns ordinary magnets into super strong Polymagnets that behave like springs and latches.

    We will cover a basic introduction to magnets, magnet conventions, the Polymagnet catalog of pre-engineered magnet designs, operation of the MagPrinter, and safety for the MagPrinter and magnet handling.

    In the hands-on section of the class, you’ll learn the design software for customizing the shape and behavior of your magnet design. At the MagPrinter, each participant will make their very own spring magnet.

    Project: Magnetic spring-on-a-stick

    Prerequisites: None

    Equipment access: MagPrinter

    Minimum age: 12

    Supervision requirements: During class, all 12- to 15-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

    When using the MagPrinter station outside of class time, 12-to-15-year-old members must be accompanied and supervised by a parent or guardian who has passed the safety and basic use course.

    Safety: Closed-toed shoes are required.

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    4 sessions currently scheduled:
        Magnet Printing SBU Saturday, 11/29/14 12:00 PM 3.0 Hours 6 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $75.00 plus $10.00 Materials Fee
        Non-member Sign Up $90.00 plus $10.00 Materials Fee
        Magnet Printing SBU Saturday, 12/6/14 10:30 AM 3.0 Hours 6 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $75.00 plus $10.00 Materials Fee
        Non-member Sign Up $90.00 plus $10.00 Materials Fee
        Magnet Printing SBU Saturday, 12/13/14 10:30 AM 3.0 Hours 6 SEATS TOTAL
    6 SEATS LEFT
        * Member Sign Up $75.00 plus $10.00 Materials Fee
        Non-member Sign Up $90.00 plus $10.00 Materials Fee
        Magnet Printing SBU Saturday, 12/20/14 10:30 AM 3.0 Hours 6 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $75.00 plus $10.00 Materials Fee
        Non-member Sign Up $90.00 plus $10.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    TEC104: 3D Scanning and Editing on the NextEngine

    Learn how to take full-color 3D scans on TechShop's NextEngine scanner!

    This Safety and Basic Use (SBU) course will show you how to scan a physical object and create a usable model that can be imported into countless CAD packages. Learn to scan, align, trim, fuse, and fill.

    With such versatile scanning capabilities, you can use the NextEngine 3D scanner to reverse engineer existing parts that are too difficult to take measurements from.

    Once you take this class, your resources as a maker and 3D modeler will open up a whole new world!

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    2 sessions currently scheduled:
        3D Scanning and Editing on the NextEngine Thursday, 12/11/14 6:00 PM 2.0 Hours 4 SEATS TOTAL
    2 SEATS LEFT
        * Member Sign Up $60.00, No Materials Fee
        Non-member Sign Up $75.00, No Materials Fee
        3D Scanning and Editing on the NextEngine Tuesday, 12/16/14 6:00 PM 2.0 Hours 4 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $60.00, No Materials Fee
        Non-member Sign Up $75.00, No Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
     TEXTILES (TXL)
     
       
    TXL101: Basic Sewing Machine SBU

    In this Safety and Basic Use (SBU) class, learn to use a sewing machine. Acquire skills to correctly thread machine, fill and place the bobbin, and change the foot. Also learn to sew straight, zig-zag, basting, and other specialty stitches. This machine sews through regular weight fabric but not heavy duty materials like leather or thick canvas. Go on to create messenger bags, rocket parachutes, clothing, plushies, sails, costumes, and more!

    Project: Pocket bag

    Prerequisites: None

    Equipment access: Sewing machine

    Minimum age: 12

    Supervision requirements: During class, all 12- to 15-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

    When using the sewing machine outside of class time, 12- to 15-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

    Safety: Closed-toed shoes are required.

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    3 sessions currently scheduled:
        Basic Sewing Machine SBU Sunday, 11/30/14 10:00 AM 1.5 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $45.00 plus $5.00 Materials Fee
        Non-member Sign Up $55.00 plus $5.00 Materials Fee
        Basic Sewing Machine SBU Sunday, 12/7/14 10:00 AM 1.5 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $45.00 plus $5.00 Materials Fee
        Non-member Sign Up $55.00 plus $5.00 Materials Fee
        Basic Sewing Machine SBU Sunday, 12/14/14 10:00 AM 1.5 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $45.00 plus $5.00 Materials Fee
        Non-member Sign Up $55.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    TXL103SF: CNC Brother Embroiderer SBU

    In this Safety and Basic Use (SBU) class, learn to create custom embroidery designs with the intuitive and easy-to-use Brother embroidery machine. Take part in several demos and become familiar with hooping methods, needles, threading, several types of stabilizers, and more. See how to create digitized stitches based on monogramming and logo art as well as clipart-style designs. New to digitizing? Take TXL204: Digitizer CNC Embroiderer Software next!

    Project: Embroidered patch

    Prerequisites: None

    Equipment access: Embroidery machine

    Minimum age: 12

    Supervision requirements: During class, all 12- to 15-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

    When using the embroidery machine outside of class time, 12- to 15-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

    Safety: Closed-toed shoes are required.

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    3 sessions currently scheduled:
        CNC Brother Embroiderer SBU Sunday, 11/30/14 3:00 PM 2.0 Hours 4 SEATS TOTAL
    1 SEAT LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        CNC Brother Embroiderer SBU Sunday, 12/7/14 3:00 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        CNC Brother Embroiderer SBU Sunday, 12/14/14 3:00 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    TXL105: Industrial Serger Sewing Machine SBU

    In this Safety and Basic Use (SBU) class, learn to use the Juki four-thread industrial serger sewing machine. Get hands-on serger experience using overlock stitching to create high quality, soft-feeling seams and fine rolled hems. Take advantage of this powerful machine to sew and hem heavy, layered materials like canvas and leather. Expect to increase productivity after learning this efficient machine.

    Project: Small pocket bag

    Prerequisites: None

    Equipment access: Industrial serger sewing machine

    Minimum age: 12

    Supervision requirements: All 12- to 15-year-olds must attend class with a parent or guardian and be supervised, while using the Industrial serger sewing machine, by a parent or guardian who has passed the SBU.

    Safety: Closed-toed shoes are required.



    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    2 sessions currently scheduled:
        Industrial Serger Sewing Machine SBU Wednesday, 12/10/14 5:00 PM 1.5 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $45.00 plus $5.00 Materials Fee
        Non-member Sign Up $55.00 plus $5.00 Materials Fee
        Industrial Serger Sewing Machine SBU Monday, 12/15/14 5:00 PM 1.5 Hours 4 SEATS TOTAL
    2 SEATS LEFT
        * Member Sign Up $45.00 plus $5.00 Materials Fee
        Non-member Sign Up $55.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    TXL110: Industrial Sewing Machines - SBU

    In this Safety and Basic Use (SBU) class, learn to use the Juki straight (or single) stitch industrial sewing machine and the Juki industrial walking foot sewing machine. Practice methods of speed control and accuracy. Operate the presser foot with a knee lever and enjoy continuous bobbin winding. Then get to know the walking foot industrial sewing machine.

    This powerful machine is perfect for working with heavyweight materials such as leather, canvas, or multiple layers of fabric. Experience the walking foot advantage as it moves both the top and bottom of the fabric to keep the fabric from shifting. Start sewing like a pro!

    Project: Scissor pouch

    Prerequisites: None

    Equipment access: Industrial single stitch sewing machine and industrial walking foot sewing machine

    Minimum age: 12

    Supervision requirements: All 12- to 15-year-olds must attend class with a parent or guardian and be supervised, while using the industrial sewing machines, by a parent or guardian who has passed the SBU.

    Safety: Closed-toed shoes are required.



    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

    2 sessions currently scheduled:
        Industrial Sewing Machines - SBU Wednesday, 12/3/14 5:00 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Industrial Sewing Machines - SBU Wednesday, 12/17/14 5:00 PM 2.0 Hours 5 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    TXL204: Digitizer CNC Embroiderer Software

    In this lecture-based class, learn the many aspects of this feature-rich, digitizing (creating machine embroidery stitches from 2D artwork) software package by Janome. (The software also supports Brother.) See how embroidery designs are created from existing artwork, objects (e.g., shapes, text, and clipart), and original artwork. This software-focused class does not include time on the CNC embroidery machine. Prepare to start having fun printing art in thread!

    Project: None

    Prerequisites: None. TXL103 CNC Embroidery Machine is recommended

    Equipment access: Digitizer embroidery software

    Minimum age: 12

    Supervision requirements: All 12- to 15-year-olds must attend class with a parent or guardian and be supervised, while using the computer, by a parent or guardian.

    Safety: Closed-toed shoes are required.



    3 sessions currently scheduled:
        Digitizer CNC Embroiderer Software Sunday, 11/30/14 12:00 PM 2.5 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00, No Materials Fee
        Non-member Sign Up $75.00, No Materials Fee
        Digitizer CNC Embroiderer Software Sunday, 12/7/14 12:00 PM 2.5 Hours 4 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $60.00, No Materials Fee
        Non-member Sign Up $75.00, No Materials Fee
        Digitizer CNC Embroiderer Software Sunday, 12/14/14 12:00 PM 2.5 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00, No Materials Fee
        Non-member Sign Up $75.00, No Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
     WELDING / HOTSHOP (WLD)
     
       
    WLD101: TIG Welding SBU

    Welding is the process of fusing materials together.

    Learn how to use the basic TIG (tungsten inert gas) welding equipment in this Safety and Basic Use (SBU) class. Get started creating quality weld beads on mild steel. While this class practices on thin steel, the TIG welder is capable of welding material up to 1/2” thick.

    With extensive practice, TIG welding can be used with a wide variety of different metals, producing a very pure, precise, and attractive weld.

    Project: No project; just guided practice with an instructor.

    Prerequisite(s): None. However, successful completion of MTL103: Basic Metal Shop will provide access to the cutting and grinding tools needed for working with metal.

    Equipment access: TIG welder

    Minimum age: 12

    Supervision requirements: During class, all 12- to 15-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

    When using the welder outside of class time, 12- to 15-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

    Safety

  • Mandatory: Closed-toed shoes made of natural fibers or leather, natural fiber or leather long sleeved shirt, natural fiber or leather long pants. Welding hood, gloves and jacket will beprovided by TechShop.
  • Advised: Leather welding jacket, leather welding pants, leather boots, respirator and hearing protection.

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

  • 6 sessions currently scheduled:
        TIG Welding SBU Saturday, 11/29/14 10:30 AM 2.0 Hours 4 SEATS TOTAL
    CLASS FULL
        TIG Welding SBU Saturday, 12/6/14 3:30 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $55.00 plus $5.00 Materials Fee
        Non-member Sign Up $70.00 plus $5.00 Materials Fee
        TIG Welding SBU Wednesday, 12/10/14 7:00 PM 2.0 Hours 4 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $55.00 plus $5.00 Materials Fee
        Non-member Sign Up $70.00 plus $5.00 Materials Fee
        TIG Welding SBU Thursday, 12/18/14 7:30 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $55.00 plus $5.00 Materials Fee
        Non-member Sign Up $70.00 plus $5.00 Materials Fee
        TIG Welding SBU Saturday, 12/27/14 3:30 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $55.00 plus $5.00 Materials Fee
        Non-member Sign Up $70.00 plus $5.00 Materials Fee
        TIG Welding SBU Wednesday, 12/31/14 7:30 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $55.00 plus $5.00 Materials Fee
        Non-member Sign Up $70.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    WLD102: MIG Welding SBU

    Welding is the process of fusing materials together. In this Safety and Basic Use (SBU) class, learn to use a basic metal inert gas (MIG) welder with solid wire and shielding gas to create quality weld beads on steel up to 1/2" thick. This semi-automatic method of welding (continuous consumable wire feed), also called GMAW (gas metal arc welding) and wire feed welding, offers versatility, speed, and quality. About as easy as welding gets, this is a great place for the beginner to start.

    Project: Guided practice with an instructor

    Prerequisites: None. However, MTL103: Basic Metal Shop is recommended.

    Equipment access: MIG welder

    Minimum age: 12

    Supervision requirements: During class, all 12- to 15-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

    When using the welder outside of class time, 12- to 15-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

    Safety

  • Mandatory: Closed-toed shoes made of natural fibers or leather, natural fiber or leather long sleeved shirt, natural fiber or leather long pants. Welding hood, gloves and jacket will be provided by TechShop.
  • Advised: Leather welding jacket, leather welding pants, leather boots, respirator and hearing protection.

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

  • 5 sessions currently scheduled:
        MIG Welding SBU Saturday, 12/6/14 1:00 PM 2.0 Hours 5 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $55.00 plus $5.00 Materials Fee
        Non-member Sign Up $70.00 plus $5.00 Materials Fee
        MIG Welding SBU Wednesday, 12/10/14 5:00 PM 2.0 Hours 5 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $55.00 plus $5.00 Materials Fee
        Non-member Sign Up $70.00 plus $5.00 Materials Fee
        MIG Welding SBU Thursday, 12/18/14 5:00 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $55.00 plus $5.00 Materials Fee
        Non-member Sign Up $70.00 plus $5.00 Materials Fee
        MIG Welding SBU Saturday, 12/27/14 1:00 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $55.00 plus $5.00 Materials Fee
        Non-member Sign Up $70.00 plus $5.00 Materials Fee
        MIG Welding SBU Wednesday, 12/31/14 5:00 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $55.00 plus $5.00 Materials Fee
        Non-member Sign Up $70.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    WLD103: Oxy-Acetylene Torch SBU

    In this Safety and Basic Use (SBU) class, learn to use an oxy-acetylene torch to cut and weld steel. Oxy welding uses a mixture of fuel and oxygen powerful enough to join two pieces of steel or gentle enough to braze aluminum, stainless steel, or copper. Make durable welds with this versatile, fun, and easy-to-learn torch.

    Project: Guided practice with an instructor

    Prerequisites: None. However, MTL103: Basic Metal Shop is recommended.

    Equipment access:Oxy-acetylene torch

    Minimum age: 16

    Supervision requirements: During class, all 16- and 17-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

    When using the welder outside of class time, 16- and 17-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

    Safety

  • Mandatory: Closed-toed shoes made of natural fibers or leather, natural fiber or leather long sleeved shirt,natural fiber or leather long pants. Welding glasses, gloves and jacket will be provided by TechShop.
  • Advisable: Leather welding jacket, leather welding pants, leather boots, respirator

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

  • 2 sessions currently scheduled:
        Oxy-Acetylene Torch SBU Thursday, 12/11/14 5:00 PM 3.0 Hours 4 SEATS TOTAL
    CLASS FULL
        Oxy-Acetylene Torch SBU Monday, 12/29/14 5:00 PM 3.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $90.00 plus $5.00 Materials Fee
        Non-member Sign Up $115.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    WLD104: Stick Welding (SMAW) SBU

    Welding is the process of fusing materials together.

    Stick welding, also called shielded metal arc welding, or SMAW, is an electric welding procedure that uses consumable stick electrodes that act as the electrode, filler medium and shielding mechanism all in one.

    In this class, learn the fundamental safety procedures accompanying arc welding as well as how to weld mild steel with commonly available electrodes. We will also cover the arc welder setup, weld preparation, electrode size/type selection, and post weld slag cleanup/removal.

    Stick welding is fast and very powerful; however, it is not as clean as MIG or TIG and requires more grinding and cleaning after welding.

    Project: Guided practice with an instructor

    Prerequisites: None. However, MTL103: Basic Metal Shop is recommended.

    Equipment access: Stick welder

    Minimum age: 12

    Supervision requirements: During class, all 12- to 15-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

    When using the welder outside of class time, 12- to 15-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

    Safety

  • Mandatory: Closed-toed shoes made of natural fibers or leather, natural fiber or leather long sleeved shirt, natural fiber or leather long pants. Welding hood, gloves and jacket will be provided by TechShop.
  • Advised: Leather welding jacket, leather welding pants, leather boots, respirator and hearing protection.

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

  • 3 sessions currently scheduled:
        Stick Welding (SMAW) SBU Sunday, 11/30/14 10:30 AM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Stick Welding (SMAW) SBU Tuesday, 12/2/14 7:30 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Stick Welding (SMAW) SBU Saturday, 12/20/14 3:30 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    WLD201: TIG Welding 2 - Aluminum

    After completing the TIG Safety and Basic Use (SBU) class, you can try your skills in a different material.

    Aluminum has characteristics that require specific equipment setup, metal preparation and torch operation. In this class, you will practice specific joints and improve weld bead quality under the guidance of an instructor. Lap, butt, corner and fillet welds will all be discussed and individual students will perform at their own rates. Emphasis will be placed on visual inspection of welds and heat zone theory, so that you gain a better understanding of what a quality weld joint really looks like.

    Prerequisite: Successful completion of the TIG Welding SBU.

    Safety: You must wear long pants and a long-sleeved shirt in natural fibers in the Hot Shop, and remember to always wear closed-toed shoes at TechShop.



    3 sessions currently scheduled:
        TIG Welding 2 - Aluminum Saturday, 11/29/14 1:30 PM 2.0 Hours 2 SEATS TOTAL
    2 SEATS LEFT
        * Member Sign Up $80.00 plus $10.00 Materials Fee
        Non-member Sign Up $100.00 plus $10.00 Materials Fee
        TIG Welding 2 - Aluminum Saturday, 12/13/14 3:30 PM 2.0 Hours 2 SEATS TOTAL
    2 SEATS LEFT
        * Member Sign Up $80.00 plus $10.00 Materials Fee
        Non-member Sign Up $100.00 plus $10.00 Materials Fee
        TIG Welding 2 - Aluminum Tuesday, 12/23/14 7:30 PM 2.0 Hours 2 SEATS TOTAL
    2 SEATS LEFT
        * Member Sign Up $80.00 plus $10.00 Materials Fee
        Non-member Sign Up $100.00 plus $10.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    WLD301: Advanced Welding Lab

    The MIG and TIG welding lab is a place to practice techniques, develop skills, and get help.

    Come to class with a goal in mind and project in hand. This student-driven class does not rely on handouts or traditional instruction; instead the class is driven by student questions and needs.

    Examples: Weld very thin steel, make clean welds on tubing, receive feedback on skills, get advice on fixturing a difficult workpiece.

    Students must have taken and passed the appropriate welding Safety and Basic Use (SBU) class; if you're going to get help with TIG welding, for example, you must have passed the TIG SBU. This is not an SBU and will not count towards machine access.

    Project: None. Students will have access to welding coupons and filler rod but must bring any other materials needed for their project.

    Prerequisites

  • Required: Must have passed the appropriate MIG or TIG welding SBU for the equipment you will be working on
  • Recommended: 12 hours experience TIG welding, 6 hours experience MIG welding

    Minimum age: 12

    Supervision requirements: During class, all 12- to 15-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

    When using the welder outside of class time, 12- to 15-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

    Safety

  • Mandatory: Welding helmet, closed-toed shoes made of natural fibers or leather, natural fiber or leather long sleeved shirt,natural fiber or leather long pants. Welding hood, gloves and jacket will be supplied by TechShop.
  • Advisable: Leather welding jacket, leather welding pants, leather boots, respirator

  • 2 sessions currently scheduled:
        Advanced Welding Lab Thursday, 12/11/14 7:30 PM 2.0 Hours 3 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        Advanced Welding Lab Monday, 12/29/14 7:30 PM 2.0 Hours 3 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $60.00 plus $5.00 Materials Fee
        Non-member Sign Up $75.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
     WOODSHOP (WOD)
     
       
    WOD101: Woodshop SBU

    Learn the fundamentals of woodworking and how to safely operate the core woodshop tools in this Safety and Basic Use (SBU) class.

    Get practical, hands-on experience using a SawStop table saw, sliding compound miter saw, drill press, band saw, and belt and disk sanders. Learn to make straight cuts (rip and crosscut), mitered cuts, curved cuts, smooth edges, and drill holes.

    Project: Build a small wooden shelf

    Prerequisites: None

    Equipment access: Sliding compound miter saw, table saw, wood drill press, wood band saw, and belt and disc sanders

    Minimum age: 16

    Supervision requirements: None

    Safety

  • Mandatory: Closed-toed shoes, eye protection, short sleeves
  • Advised: Hearing protection, particle filter or dust mask

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

  • 9 sessions currently scheduled:
        Woodshop SBU Saturday, 11/29/14 10:00 AM 2.5 Hours 5 SEATS TOTAL
    CLASS FULL
        Woodshop SBU Sunday, 11/30/14 5:00 PM 2.5 Hours 5 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $75.00 plus $10.00 Materials Fee
        Non-member Sign Up $95.00 plus $10.00 Materials Fee
        Woodshop SBU Friday, 12/5/14 5:00 PM 2.5 Hours 4 SEATS TOTAL
    CLASS FULL
        Woodshop SBU Saturday, 12/6/14 12:00 PM 2.5 Hours 5 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $75.00 plus $10.00 Materials Fee
        Non-member Sign Up $95.00 plus $10.00 Materials Fee
        Woodshop SBU Wednesday, 12/10/14 5:00 PM 2.5 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $75.00 plus $10.00 Materials Fee
        Non-member Sign Up $95.00 plus $10.00 Materials Fee
        Woodshop SBU Saturday, 12/13/14 12:00 PM 2.5 Hours 5 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $75.00 plus $10.00 Materials Fee
        Non-member Sign Up $95.00 plus $10.00 Materials Fee
        Woodshop SBU Saturday, 12/20/14 12:00 PM 2.5 Hours 5 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $75.00 plus $10.00 Materials Fee
        Non-member Sign Up $95.00 plus $10.00 Materials Fee
        Woodshop SBU Saturday, 12/27/14 12:00 PM 2.5 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $75.00 plus $10.00 Materials Fee
        Non-member Sign Up $95.00 plus $10.00 Materials Fee
        Woodshop SBU Wednesday, 12/31/14 5:00 PM 2.5 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $75.00 plus $10.00 Materials Fee
        Non-member Sign Up $95.00 plus $10.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    WOD102: Hand Tool Basics

    This is a great skill building class for adults who may have missed high school shop class or are looking to familiarize themselves with these tools before undertaking a DIY project. The class is also ideal for young people who are interested in learning how these tools can empower them to build whatever they imagine, from a skate ramp to a backyard roller coaster.

    In this class, you will learn how to safely operate a number of the most frequently used hand tools. Your instructor will guide you through the proper techniques to cut, shape, assemble, and finish a small project.

    1 session currently scheduled:
        Hand Tool Basics Saturday, 12/13/14 9:30 AM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $50.00 plus $5.00 Materials Fee
        Non-member Sign Up $65.00 plus $5.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    WOD103: Wood Lathe SBU

    Woodturning is a method of woodworking used to create wooden bowls, pens, table legs and endless other round or cylindrical items on a lathe.

    Learn to safely use the lathe to make wooden parts in this Safety and Basic Use (SBU) class. Discover how to set up the lathe, prepare raw materials, and use different wood turning tools. Spin circles around the shop with the new skills acquired in this class!

    Project: Turn a wooden spindle

    Prerequisites: WOD101: Woodshop SBU is recommended but not required

    Equipment access: Wood lathe

    Minimum age: 16

    Supervision requirements: None

    Safety

  • Mandatory: Closed-toed shoes, eye protection, short sleeves, face shield
  • Advisable: Hearing protection, particle filter, or dust mask

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

  • 4 sessions currently scheduled:
        Wood Lathe SBU Sunday, 11/30/14 11:00 AM 2.0 Hours 4 SEATS TOTAL
    1 SEAT LEFT
        * Member Sign Up $60.00 plus $10.00 Materials Fee
        Non-member Sign Up $75.00 plus $10.00 Materials Fee
        Wood Lathe SBU Sunday, 12/7/14 10:00 AM 2.0 Hours 4 SEATS TOTAL
    CLASS FULL
        Wood Lathe SBU Thursday, 12/18/14 5:00 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $10.00 Materials Fee
        Non-member Sign Up $75.00 plus $10.00 Materials Fee
        Wood Lathe SBU Sunday, 12/21/14 10:00 AM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $10.00 Materials Fee
        Non-member Sign Up $75.00 plus $10.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    WOD201: Jointer, Planer and Table Router SBU

    In this Safety and Basic Use (SBU) class, learn proper techniques and how to safely operate the jointer, planer, and table-mounted router.

    Use these woodworking tools to turn rough lumber into finished boards (achieve precise thickness, square edges and flat surfaces) as well as create complex profiles for edge finishing and joinery operations. Say goodbye to the constraints of lumberyard wood and the high price of mail order wood. Say hello to affordable custom woodworking projects!

    Project: Perform various operations on a piece of wood

    Prerequisites: WOD 101: Basic Woodshop SBU

    Equipment access: Table-mounted router, jointer, planer

    Minimum age: 16

    Supervision requirements: None

    Safety

  • Mandatory: Closed-toed shoes, eye protection, short sleeves
  • Advisable: Hearing protection, particle filter or dust mask, face shield

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

  • 5 sessions currently scheduled:
        Jointer, Planer and Table Router SBU Wednesday, 12/3/14 5:00 PM 2.0 Hours 4 SEATS TOTAL
    2 SEATS LEFT
        * Member Sign Up $60.00 plus $10.00 Materials Fee
        Non-member Sign Up $75.00 plus $10.00 Materials Fee
        Jointer, Planer and Table Router SBU Wednesday, 12/10/14 8:00 PM 2.0 Hours 4 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $60.00 plus $10.00 Materials Fee
        Non-member Sign Up $75.00 plus $10.00 Materials Fee
        Jointer, Planer and Table Router SBU Wednesday, 12/17/14 5:00 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $10.00 Materials Fee
        Non-member Sign Up $75.00 plus $10.00 Materials Fee
        Jointer, Planer and Table Router SBU Saturday, 12/20/14 3:00 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $10.00 Materials Fee
        Non-member Sign Up $75.00 plus $10.00 Materials Fee
        Jointer, Planer and Table Router SBU Wednesday, 12/31/14 8:00 PM 2.0 Hours 4 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $60.00 plus $10.00 Materials Fee
        Non-member Sign Up $75.00 plus $10.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    WOD304: Advanced Woodworking - Joinery

    Wood joinery is the foundation of building furniture and wooden structures. Joints can be very simple and purely functional or they can be complex and elegant, requiring a master level of artistry and skill to produce.

    In this class, learn joint-making techniques as well as highly valuable theory and background information as they apply to joint making. Learn when to use certain joints, which joints are the strongest, how grain direction influences joint strength, glue selection, pre-gluing techniques, proper clamping and much more. This class will provide the foundation needed to create virtually any wood structural project.

    Class time will be split between discussing theory in the classroom and learning joinery techniques and creating joints in the woodshop.

    Prerequisites:Successful completion of WOD101: Woodshop SBU and WOD201: Planer, Jointer and Router Table SBU.

    2 sessions currently scheduled:
        Advanced Woodworking - Joinery Thursday, 12/11/14 5:00 PM 4.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $120.00 plus $10.00 Materials Fee
        Non-member Sign Up $150.00 plus $10.00 Materials Fee
        Advanced Woodworking - Joinery Monday, 12/22/14 5:00 PM 4.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $120.00 plus $10.00 Materials Fee
        Non-member Sign Up $150.00 plus $10.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
     WORKSHOPS (WKS)
     
       
    WKS: Building a Wooden Toolbox

    In this workshop, we will take the skills we learned in the basic woodshop class and build on them to create a wooden toolbox.

    This course is a must for anyone looking to take their skills to the next level and make higher quality wooden products. Learn how to plan, measure and cut accurately, making parts that fit together and match our designs. Bob Guerrero will lead the class and share woodworking tips and tricks he's learned over the decades he's taught woodshop courses for high schools and colleges.

    1 session currently scheduled:
        Building a Wooden Toolbox Sunday, 12/14/14 10:00 AM 3.0 Hours 5 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $75.00 plus $20.00 Materials Fee
        Non-member Sign Up $95.00 plus $20.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    WKS100: Two-Tone, End-Grain Cutting Board Workshop

    Join Seth Newsome for this three-hour workshop and learn how to put together your own two-tone, end-grain cutting board using the skills you acquired from the Woodshop SBU. Seth will show you the steps for cutting, gluing and finishing your cutting board made from maple and cherry.

    Workshop fee includes materials.

    Prerequisite: You must pass the Woodshop SBU before taking this class.

    3 sessions currently scheduled:
        Two-Tone, End-Grain Cutting Board Workshop Sunday, 12/7/14 11:00 AM 3.5 Hours 3 SEATS TOTAL
    CLASS FULL
        Two-Tone, End-Grain Cutting Board Workshop Sunday, 12/14/14 2:30 PM 3.5 Hours 3 SEATS TOTAL
    2 SEATS LEFT
        * Member Sign Up $90.00 plus $30.00 Materials Fee
        Non-member Sign Up $100.00 plus $30.00 Materials Fee
        Two-Tone, End-Grain Cutting Board Workshop Sunday, 12/21/14 11:00 AM 3.5 Hours 3 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $90.00 plus $30.00 Materials Fee
        Non-member Sign Up $100.00 plus $30.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    WKS109: Ornament Making workshop

    Have some fun this holiday season making custom laser cut wood ornaments with our laser cutters. Feel free to bring your own vector file in Adobe Illustrator format, or bring a high contrast black and white image and transform it into a beautiful wooden ornament. Happy holidays from TechShop SOMA.

    3 sessions currently scheduled:
        Ornament Making workshop
    (Ornament workshop)
    Saturday, 12/6/14 10:00 AM 2.0 Hours 8 SEATS TOTAL
    8 SEATS LEFT
        * Member Sign Up $20.00, No Materials Fee
        Non-member Sign Up $35.00, No Materials Fee
        Ornament Making workshop
    (Ornament workshop)
    Saturday, 12/13/14 10:00 AM 2.0 Hours 8 SEATS TOTAL
    7 SEATS LEFT
        * Member Sign Up $20.00, No Materials Fee
        Non-member Sign Up $35.00, No Materials Fee
        Ornament Making workshop
    (Ornament workshop)
    Saturday, 12/20/14 10:00 AM 2.0 Hours 8 SEATS TOTAL
    7 SEATS LEFT
        * Member Sign Up $20.00, No Materials Fee
        Non-member Sign Up $35.00, No Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    WKS112: Sew a Stocking Workshop

    Get creative and come down to Techshop to sew custom stockings for your loved ones. Materials will be provided, but you're more than welcome to bring your own wacky fabrics for even more customization. Happy Holidays from Techshop.

    2 sessions currently scheduled:
        Sew a Stocking Workshop
    (Sew a Stocking Workshop)
    Saturday, 12/6/14 11:00 AM 2.0 Hours 8 SEATS TOTAL
    8 SEATS LEFT
        * Member Sign Up $20.00, No Materials Fee
        Non-member Sign Up $35.00, No Materials Fee
        Sew a Stocking Workshop
    (Sew a Stocking Workshop)
    Saturday, 12/13/14 11:00 AM 2.0 Hours 8 SEATS TOTAL
    8 SEATS LEFT
        * Member Sign Up $20.00, No Materials Fee
        Non-member Sign Up $35.00, No Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    WKS1125: Candle Lantern Workshop

    Create a beautiful laser cut candle lantern this holiday season. a perfect handmade gift for that loved one who is hard to shop for. Happy Holidays from Techshop.

    3 sessions currently scheduled:
        Candle Lantern Workshop
    (Candle Lantern Workshop)
    Saturday, 12/6/14 2:30 PM 2.0 Hours 5 SEATS TOTAL
    5 SEATS LEFT
        * Member Sign Up $45.00, No Materials Fee
        Non-member Sign Up $55.00, No Materials Fee
        Candle Lantern Workshop
    (Candle Lantern Workshop)
    Saturday, 12/13/14 2:30 PM 2.0 Hours 5 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $45.00, No Materials Fee
        Non-member Sign Up $55.00, No Materials Fee
        Candle Lantern Workshop
    (Candle Lantern Workshop)
    Saturday, 12/20/14 2:30 PM 2.0 Hours 5 SEATS TOTAL
    4 SEATS LEFT
        * Member Sign Up $45.00, No Materials Fee
        Non-member Sign Up $55.00, No Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    WKS423: Moldmaking - Custom Chocolate Molds

    Looking to make the perfect handmade gift? You can't go wrong with chocolate!

    In this workshop, you will be equipped with everything you need to make the sweetest present imaginable: specialty chocolates made from a mold of your own creation! Each student gets food-safe silicon mold making kit with enough material to make several molds, which can be used to make an infinite number of tasty treats! Basic festive shapes will be provided, but feel free to bring objects you are interested in creating a mold from (shallow, solid plastic objects work best). This class is great for kids!

    Please note: We encourage everyone to attend this child-friendly event (ages 8 and up), but normal young maker policies still apply. Everyone under the age of 18 MUST be accompanied by a parent or legal guardian at all times while on TechShop premises. No exceptions.

    3 sessions currently scheduled:
        Moldmaking - Custom Chocolate Molds
    (Tasty Fun For Everyone!)
    Sunday, 12/7/14 10:00 AM 2.0 Hours 10 SEATS TOTAL
    9 SEATS LEFT
        * Member Sign Up $25.00 plus $25.00 Materials Fee
        Non-member Sign Up $35.00 plus $25.00 Materials Fee
        Moldmaking - Custom Chocolate Molds
    (Tasty Fun For Everyone!)
    Sunday, 12/14/14 10:00 AM 2.0 Hours 10 SEATS TOTAL
    8 SEATS LEFT
        * Member Sign Up $25.00 plus $25.00 Materials Fee
        Non-member Sign Up $35.00 plus $25.00 Materials Fee
        Moldmaking - Custom Chocolate Molds
    (Tasty Fun For Everyone!)
    Sunday, 12/21/14 10:00 AM 2.0 Hours 10 SEATS TOTAL
    10 SEATS LEFT
        * Member Sign Up $25.00 plus $25.00 Materials Fee
        Non-member Sign Up $35.00 plus $25.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.
       
    WKS436: Woodturning Workshop - Bowl Making

    In this 3-1/2 hour workshop, you will learn basic bowl making on the lathe, from a square maple board to finished bowl.

    We will cover sharpening and tool shape; the four basic cuts and how to best use them; initial mounting; roughing to round and hogging off; techniques for re-mounting the bowl; shaping the exterior; hollowing and interior finish; sanding; reversing the bowl blank and turning the foot and bottom. Time permitting, we may discuss green turning techniques.

    Material costs include a 6 x 6 x 2 maple blank for each student. If you have your own bowl gouge, please feel free to bring it.

    Prerequisite: Successful completion of the Basic Wood Lathe Safety and Basic Use (SBU) class before.

    3 sessions currently scheduled:
        Woodturning Workshop - Bowl Making Sunday, 11/30/14 1:30 PM 3.5 Hours 4 SEATS TOTAL
    CLASS FULL
        Woodturning Workshop - Bowl Making Sunday, 12/7/14 1:00 PM 3.5 Hours 4 SEATS TOTAL
    CLASS FULL
        Woodturning Workshop - Bowl Making Sunday, 12/21/14 1:00 PM 3.5 Hours 4 SEATS TOTAL
    3 SEATS LEFT
        * Member Sign Up $50.00 plus $20.00 Materials Fee
        Non-member Sign Up $65.00 plus $20.00 Materials Fee
        * Membership is verified at the time of the class session. Be sure to bring your badge.