Take Classes


Anyone Can Take Classes at TechShop -- You Do NOT Need to Be a TechShop Member to Take Classes!

TechShop Mid-Peninsula Class Listings


View Class Listings at Our Other Locations Here >> Change TechShop Location

View the TechShop Mid-Peninsula Interactive Class Calendar Here >> MONTH-AT-A-GLANCE


Category:

 ARTS AND CRAFTS (ART)
 
   
ARTWKS012: Knife Making on the Waterjet

This workshop will introduce you to the basics of knife making using a combination of traditional hand tool techniques and high powered equipment available here at TechShop. Beginning today you will be designing your own knife and have it cut out on the waterjet. You will be learning about different knife styles, how to create a knife edge, heat treat your knife, and finally how to finish it up with custom handles. By the end of the workshop you will have completed a fully functional and custom made knife.

There are currently no sessions of this class scheduled.
    Please Email Us to request more sessions of this class to be added to our schedule.
 
   
ART103: Silk Screen Printing Basics - SBU

In this hands-on class, learn the basics of silkscreen printing. TechShop makes it easy by using vinyl stencils rather than photo-emulsion. Prepare a vinyl stencil, transfer onto a screen, apply ink to fabric through screen, and then heat set the ink. It’s that simple.

Want to print a t-shirt using your own artwork? Bring a simple black and white drawing that will be cut by hand. Participants who have passed the Vinyl Cutter Safety and Basic Use (SBU) class may bring in a pre-cut design to use. Otherwise, choose from several designs provided. Get ready to start making custom silkscreened t-shirts!

Project: Custom t-shirt or tote bag

Prerequisites: None

Equipment access: Silkscreen station

Minimum age: 12

Supervision requirements: During class, all 12- to 15-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

When using the silkscreen station outside of class time, 12- to 15-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

Safety: Closed-toed shoes are required.

Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

1 session currently scheduled:
    Silk Screen Printing Basics - SBU Tuesday, 11/4/14 4:30 PM 3.0 Hours 4 SEATS TOTAL
4 SEATS LEFT
    * Member Sign Up $90.00 plus $10.00 Materials Fee
    Non-member Sign Up $115.00 plus $10.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
   
ART104: Making Glass Beads with a Flaming Torch

Make art from molten glass! The process is fascinating and the result is beautiful.

You will learn to use a lampworking torch to melt glass, form and decorate your own glass beads. Western-style and Japanese-style torches will be demonstrated. Starting supplies will be provided in class.

For your safety, please wear long pants and a long-sleeved shirt in natural fibers for this class. And remember, always wear closed-toed shoes while at TechShop.

After successful completion of this class, you will be able to use TechShop's lampworking equipment to make additional beads.





2 sessions currently scheduled:
    Making Glass Beads with a Flaming Torch Friday, 11/14/14 7:00 PM 2.0 Hours 4 SEATS TOTAL
4 SEATS LEFT
    * Member Sign Up $90.00 plus $10.00 Materials Fee
    Non-member Sign Up $115.00 plus $10.00 Materials Fee
    Making Glass Beads with a Flaming Torch Monday, 11/24/14 4:00 PM 2.0 Hours 4 SEATS TOTAL
4 SEATS LEFT
    * Member Sign Up $90.00 plus $10.00 Materials Fee
    Non-member Sign Up $115.00 plus $10.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
 AUTODESK (AUD)
 
   
AUD006: Autodesk Inventor - Basics

Learn how to navigate, sketch and model in Autodesk Inventor.

In this class, you will gain a basic understanding of parametric design; file types; dimensioning; geometric constraints; patterns; adding text; inserting image files; basic modeling including Extrude, Revolve, Loft and Sweep; assemblies; exporting your file and creating laser-able and CAMable files. The goal is to provide you with enough tools to use Inventor at a solid, basic level and to inspire you to seek out more advanced features such as simulation, mold making and sheet metal.

We will use the book, “Mastering Autodesk Inventor 2013,” to explain and teach concepts. For this reason, we strongly recommend that you purchase the book and bring it to class. For your convenience, it is available in the TechShop retail store.

TechShop members who take this class will receive $35 in store credit after the completion of the class.

2 sessions currently scheduled:
    Autodesk Inventor - Basics Thursday, 11/6/14 6:30 PM 3.0 Hours 8 SEATS TOTAL
6 SEATS LEFT
    * Member Sign Up $35.00, No Materials Fee
    Non-member Sign Up $45.00, No Materials Fee
    Autodesk Inventor - Basics Friday, 11/14/14 6:30 PM 3.0 Hours 8 SEATS TOTAL
6 SEATS LEFT
    * Member Sign Up $35.00, No Materials Fee
    Non-member Sign Up $45.00, No Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
   
AUD005 : Autodesk Inventor for Sheet Metal

In this project class, you will learn how to create and assemble sheet metal parts in Autodesk Inventor.

You will be guided through the process of building sheet metal housing features, creating patterns and using iFeatures. You will learn how to use equations to drive dimensions, how to generate two-dimensional drawings of your sheet metal parts, and how to export your geometry to a CAM program, enabling you to generate a file that can be used on a CNC machine.

Prerequisite: You MUST take the Autodesk Inventor Basics class before taking this class.

2 sessions currently scheduled:
    Autodesk Inventor for Sheet Metal Monday, 11/3/14 6:00 PM 3.0 Hours 8 SEATS TOTAL
8 SEATS LEFT
    * Member Sign Up $35.00, No Materials Fee
    Non-member Sign Up $45.00, No Materials Fee
    Autodesk Inventor for Sheet Metal Tuesday, 11/11/14 6:30 PM 3.0 Hours 8 SEATS TOTAL
7 SEATS LEFT
    * Member Sign Up $35.00, No Materials Fee
    Non-member Sign Up $45.00, No Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
   
AUD009: Autodesk Inventor for Mold Design

Injection mold design and manufacturing can be one of the most expensive and time consuming processes in manufacturing and prototyping. But it doesn't have to be.

Autodesk Inventor has a number of incredible software tools that make designing complex parts much easier. The feature-rich mold design section covered in this class is one of them.

In this class, the instructor will cover several tools that are available to automate key aspects of injection mold design and testing.

- Learn how parts modeled in Inventor can be used to automatically generate an efficient mold.

- Learn how Inventor ensure that any changes to the digital model are automatically reflected in your mold design.

When you are done with your design, the file can be exported to a variety of different CAM (computer aided manufacturing) packages to generate the code needed to machine your mold on equipment such as TechShop's CNC Tormach mill. Once you've machined your mold it can be used to manufacture parts on TechShop's Morgan Press injection molding machine.

This class is a fantastic way to do in-house rapid prototyping and can help you cut down on the number of iterations needed before you have a working final mold ready for production on any scale.

1 session currently scheduled:
    Autodesk Inventor for Mold Design Monday, 11/17/14 7:00 PM 3.0 Hours 8 SEATS TOTAL
6 SEATS LEFT
    * Member Sign Up $35.00, No Materials Fee
    Non-member Sign Up $45.00, No Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
 CNC (CNC)
 
   
CNC102: CNC Vinyl Cutter SBU

Learn to use the computer-controlled vinyl cutter in this Safety and Basic Use (SBU) class. Import vector (outline) designs from graphic software such as Adobe Illustrator and CorelDRAW into FlexiStarter, the software used to control the vinyl cutter. Next, use TechShop's CNC vinyl cutter to cut adhesive vinyl sheet into professional looking signage or ready-to-apply paint masking. This is a great tool for making screens for silkscreen printing, too!

Project: Vinyl sticker

Prerequisites

  • Required: Understanding of vector-based graphics

  • Recommended: COM201: Adobe Illustrator for CNC, COM207:CorelDraw for CNC


Equipment access: Vinyl cutter

Minimum age: 12

Supervision requirements: During class, all 12- to 15-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

When using the vinyl cutter outside of class time, 12- to 15-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

Safety: Closed-toed shoes are mandatory.

Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

1 session currently scheduled:
    CNC Vinyl Cutter SBU Tuesday, 11/18/14 5:00 PM 1.5 Hours 5 SEATS TOTAL
5 SEATS LEFT
    * Member Sign Up $45.00 plus $5.00 Materials Fee
    Non-member Sign Up $55.00 plus $5.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
   
CNC302: CNC ShopBot SBU

In this Safety and Basic Use (SBU) class, learn to use the computer-controlled (CNC) ShopBot router to cut objects, parts or art designed in 2D or 3D CAD. This powerful tool is perfect for rapid prototyping and digital fabrication. Create parts with complex curves and surfaces from most woods, plastics, foams, and other composites (no metal on this machine). This class teaches the use of the machine, but does not cover CAD drawing or toolpathing. VCarve Pro (CNC 201) is a good starting point for people new to CAD and CAM.

Materials fee: Includes materials for the class project and a router bit for each student to keep.

Project: Wooden gear

Prerequisites

  • Recommended: Use of CAD and CAM software like VCarve Pro - CNC 201, Basic Woodshop SBU - WOD101


Equipment access: CNC ShopBot Router

Minimum age: 16

Supervision requirements: During class, 16- and 17-year-old -year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

When using the CNC ShopBot outside of class time, 16- and 17-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

Safety

  • Mandatory: Closed-toed shoes, eye protection, short sleeves

  • Advisable: Hearing protection, particle filter or dust mask


Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

3 sessions currently scheduled:
    CNC ShopBot SBU Tuesday, 11/4/14 7:00 PM 3.0 Hours 5 SEATS TOTAL
3 SEATS LEFT
    * Member Sign Up $90.00 plus $20.00 Materials Fee
    Non-member Sign Up $115.00 plus $20.00 Materials Fee
    CNC ShopBot SBU Saturday, 11/8/14 10:00 AM 3.0 Hours 5 SEATS TOTAL
1 SEAT LEFT
    * Member Sign Up $90.00 plus $20.00 Materials Fee
    Non-member Sign Up $115.00 plus $20.00 Materials Fee
    CNC ShopBot SBU Wednesday, 11/19/14 7:00 PM 3.0 Hours 5 SEATS TOTAL
2 SEATS LEFT
    * Member Sign Up $90.00 plus $20.00 Materials Fee
    Non-member Sign Up $115.00 plus $20.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
   
CNC301: CNC Tormach Milling Machine SBU

In this class, learn to use the CNC (computer-controlled) mill. This machine is the perfect combination of precision and power for any prototyping or hobby milling needs. Learn to convert G-code (created in InventorCAM, Cut 3D or VCarve Pro) into actual parts made from aluminum, steel, and even titanium.

Materials fee:
Includes materials for the class project and a router bit for each student to keep.

Project: Bottle opener

Prerequisites
  • Recommended: CAD experience, ability to create G-code, experience with conventional milling


Equipment access: CNC milling machine

Minimum age: 16

Supervision requirements: During class, all 16- and 17-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

When using the CNC mill outside of class time, 16- and 17-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

Safety

  • Mandatory: Closed-toed shoes, eye protection, and short sleeves. Tie hair back or secure under a cap and remove all jewelry.

  • Advisable: Hearing protection


Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

4 sessions currently scheduled:
    CNC Tormach Milling Machine SBU Monday, 11/3/14 11:00 AM 3.0 Hours 5 SEATS TOTAL
5 SEATS LEFT
    * Member Sign Up $90.00 plus $25.00 Materials Fee
    Non-member Sign Up $115.00 plus $25.00 Materials Fee
    CNC Tormach Milling Machine SBU Tuesday, 11/18/14 7:00 PM 3.0 Hours 5 SEATS TOTAL
5 SEATS LEFT
    * Member Sign Up $90.00 plus $25.00 Materials Fee
    Non-member Sign Up $115.00 plus $25.00 Materials Fee
    CNC Tormach Milling Machine SBU Wednesday, 11/26/14 11:30 AM 3.0 Hours 5 SEATS TOTAL
5 SEATS LEFT
    * Member Sign Up $90.00 plus $25.00 Materials Fee
    Non-member Sign Up $115.00 plus $25.00 Materials Fee
    CNC Tormach Milling Machine SBU Friday, 11/28/14 4:00 PM 3.0 Hours 5 SEATS TOTAL
5 SEATS LEFT
    * Member Sign Up $90.00 plus $25.00 Materials Fee
    Non-member Sign Up $115.00 plus $25.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
   
CNC403: Tormach II - 4th Axis and Tool Changes

In this class, students who have taken the basic Tormach class will learn to use advanced features of the machine and Mach3 software as well as the 4th-axis attachment. You will learn how to set up a tool index of multiple tools, increasing your efficiency of machining parts using multiple tools and parts. You will also learn how to set up and manually work the 4th-axis rotary table, opening up the world of 4th-axis machining and workholding solutions.

The 4th-axis attachment allows you to machine on a rotating cylinder, held in the horizontal or vertical position.

Setting up the tool index allows you to change tools quickly, without having to zero your Z.

Prerequisite: You must have taken and passed the basic Tormach class before enrolling in this class.

2 sessions currently scheduled:
    Tormach II - 4th Axis and Tool Changes Friday, 11/14/14 4:30 PM 3.0 Hours 6 SEATS TOTAL
6 SEATS LEFT
    * Member Sign Up $90.00, No Materials Fee
    Non-member Sign Up $115.00, No Materials Fee
    Tormach II - 4th Axis and Tool Changes Monday, 11/24/14 5:00 PM 3.0 Hours 6 SEATS TOTAL
6 SEATS LEFT
    * Member Sign Up $90.00, No Materials Fee
    Non-member Sign Up $115.00, No Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
   
CNC304: CNC Plasma Cutter SBU

Learn how to cut metal with the CNC (computer controlled) plasma cutter in this Safety and Basic Use (SBU) class. The automated cutting torch works with graphics software like CorelDRAW and two-dimensional CAD drawings from AutoCAD or Autodesk Inventor to cut virtually any shape from sheet metal, cold rolled steel, aluminum, copper, stainless steel, and other metals. This machine cuts up to 1/2" thick and has a work surface of 4’ x 8’. Sit back and relax while the computer takes over.

Project: Cut a gear from a piece of metal

Prerequisites: CAD to CAM experience and an understanding of vector-based graphics are recommended.



Equipment access: Plasma cutter

Minimum age: 16

Supervision requirements: During class, all 16- and 17-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

When using the plasma cutter outside of class time, 16- and 17-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

Safety

  • Mandatory: Closed-toed shoes, eye protection

  • Advisable: hearing protection, respirator

    Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

1 session currently scheduled:
    CNC Plasma Cutter SBU Saturday, 11/15/14 4:30 PM 2.5 Hours 5 SEATS TOTAL
4 SEATS LEFT
    * Member Sign Up $75.00 plus $5.00 Materials Fee
    Non-member Sign Up $95.00 plus $5.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
 COMPUTERS (COM)
 
   
COM201: Adobe Illustrator for CNC

Makers and designers alike agree that vector drawing is the starting point of all CNC fabrication.

Adobe Illustrator is an extremely powerful 2D vector graphics drawing program -- almost any product or invention that you imagine can begin in Illustrator. By following the pathways offered in this class, you will be able to export your files to any of the CNC machines in the TechShop arsenal.

In this class, you will learn the basics of the interface and navigation, effective drawing techniques, converting bitmaps to vectors in one step, creating clean and optimized vectors, and the most efficient techniques to prepare your files for CNC operations. You will also learn how each of the CNC machines at TechShop will work with your file to create your projects.

This class provides the foundation of skills for the following classes: CNC Concepts, CAD / CAM, ShopBot SBU, Tormach SBU, CNC Vinyl Cutter SBU, Laser Cutter SBU, and WaterJet SBU.

Prerequisite: A working knowledge of Windows operating environment!

1 session currently scheduled:
    Adobe Illustrator for CNC Saturday, 11/22/14 7:00 PM 3.0 Hours 4 SEATS TOTAL
4 SEATS LEFT
    * Member Sign Up $50.00, No Materials Fee
    Non-member Sign Up $65.00, No Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
 ELECTRONICS (EEE)
 
   
EEE100: Soldering and Basic Electronics

Learn how to use solder and a soldering iron to make small stick figures, as well as how to solder electronic "through-hole" components for electronic printed circuit board assembly (PCBs).

In this class, you will learn basic solder and flux types, safe soldering practices, and soldering iron maintenance. You will learn to de-solder using various techniques, including a "solder sucker" tool or solder braid. In addition, you will build an LED Blinkatron 2000 - it's a simple soldering project that works!

All parts are included. Add the potentiometer to change the blink speed.

This is a fun first class for kids and adults!

2 sessions currently scheduled:
    Soldering and Basic Electronics Sunday, 11/16/14 2:30 PM 2.0 Hours 6 SEATS TOTAL
4 SEATS LEFT
    * Member Sign Up $60.00 plus $5.00 Materials Fee
    Non-member Sign Up $75.00 plus $5.00 Materials Fee
    Soldering and Basic Electronics Monday, 11/17/14 8:00 PM 2.0 Hours 6 SEATS TOTAL
6 SEATS LEFT
    * Member Sign Up $60.00 plus $5.00 Materials Fee
    Non-member Sign Up $75.00 plus $5.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
   
EEE104: Electronics Instruments and Measurement

Understand and test your electronics with state of the art measurement equipment available at TechShop.

In this class, you will learn how to competently use a digital oscilloscope to probe and troubleshoot circuits. You will learn how to use high resolution digital multimeters to measure things like AC and DC voltages and currents, resistance, capacitance and other critical circuit parameters. You will also learn how to set up and use DC power supplies with current limiting capability. Finally, you will use an advanced function generator and learn how to generate sine waves, square waves at varying frequencies and voltages.

Master these tools and make all of your electronics projects work!

2 sessions currently scheduled:
    Electronics Instruments and Measurement Saturday, 11/1/14 2:30 PM 2.0 Hours 3 SEATS TOTAL
3 SEATS LEFT
    * Member Sign Up $60.00, No Materials Fee
    Non-member Sign Up $75.00, No Materials Fee
    Electronics Instruments and Measurement Saturday, 11/15/14 1:00 PM 2.0 Hours 3 SEATS TOTAL
3 SEATS LEFT
    * Member Sign Up $60.00, No Materials Fee
    Non-member Sign Up $75.00, No Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
 FABRICATION (FAB)
 
   
FAB105: Vacuum Forming SBU

Lots of parts can be made quickly and inexpensively with the use of a vacuum forming system.

In this Safety and Basic Use class, you will learn the parts of the vacuum forming machine and then make vacuum-formed parts. You will make a master (plug) tool from inexpensive materials like pine, foam, balsa or found objects; select plastic sheeting; and then use the created part as a "plug" to mold the final object from a heated plastic sheet with the assistance of atmospheric pressure.

Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

3 sessions currently scheduled:
    Vacuum Forming SBU Saturday, 11/1/14 1:30 PM 2.0 Hours 4 SEATS TOTAL
4 SEATS LEFT
    * Member Sign Up $60.00 plus $5.00 Materials Fee
    Non-member Sign Up $75.00 plus $5.00 Materials Fee
    Vacuum Forming SBU Saturday, 11/8/14 11:00 AM 2.0 Hours 4 SEATS TOTAL
3 SEATS LEFT
    * Member Sign Up $60.00 plus $5.00 Materials Fee
    Non-member Sign Up $75.00 plus $5.00 Materials Fee
    Vacuum Forming SBU Friday, 11/21/14 1:00 PM 2.0 Hours 4 SEATS TOTAL
4 SEATS LEFT
    * Member Sign Up $60.00 plus $5.00 Materials Fee
    Non-member Sign Up $75.00 plus $5.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
   
FAB106: Sand Blasting and Powder Coating SBU

Powder coating is a durable, simple to apply, easy to clean up, product. It is inexpensive, and more environmentally friendly than paint, as it has no VOCs and no solvents are used. The final product is more durable than paint, and powder is available in many colors and finish types.

The sand blaster can be used on metal, wood, glass, mirror, plastics and almost any material that is rigid. It will remove paint, rust and mill scale, as well as cleaning welds. (The parts must be baked at about 400 degrees for 15 minutes, so it will not work on magnetic items, or anything with grease in the part, like bearings.)

In this Safety and Basic Use class, you will learn how to use a cabinet sandblaster to prepare a small metal part, clean and coat it with powder, and then bake it on in the powder coat oven. There is only time in class for sandblasting steel and aluminum parts.

Note: The sandblast cabinet and powder coating oven are large enough for motorcycle frames, bicycles and many other bulky items. Please visit your local TechShop and check the oven size if you have a specific project in mind.

Because of possible shock (high voltage, low amperage) with a powder coating gun, members with a pacemaker, or any voltage sensitive medical equipment are not allowed to take this course or use the equipment.

Once you have taken and successfully passed this class, you will be cleared to use the sandblasting cabinet, powder coating gun, powder spray booth, and powder coating oven.

Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

1 session currently scheduled:
    Sand Blasting and Powder Coating SBU Saturday, 11/15/14 2:00 PM 2.0 Hours 4 SEATS TOTAL
CLASS FULL
    * Membership is verified at the time of the class session. Be sure to bring your badge.
   
FAB107: Silicone RTV Moldmaking and Casting Basics

Learn how to work with silicone RTV (room temperature vulcanization), make a small mold using a plastic cup, see how more advanced molds are made, and even cast your own part in urethane resin!

In this introductory class, you will learn to make a silicone RTV mold from a small part or pre-made plug. You will makea single-sided mold of a quarter or other small, simple part. You will also examine two-sided mold making, adding registration "buttons" and slicing the mold. You will then cast resin in an RTV mold, learning tips and tricks to mixing and pouring resin and other substances to create final pieces from a silicone RTV mold.

Designed for the beginner, this class shows how easy it is to build molds with silicone RTV.

2 sessions currently scheduled:
    Silicone RTV Moldmaking and Casting Basics Saturday, 11/8/14 2:30 PM 2.0 Hours 4 SEATS TOTAL
4 SEATS LEFT
    * Member Sign Up $60.00 plus $20.00 Materials Fee
    Non-member Sign Up $75.00 plus $20.00 Materials Fee
    Silicone RTV Moldmaking and Casting Basics Saturday, 11/22/14 2:30 PM 2.0 Hours 4 SEATS TOTAL
3 SEATS LEFT
    * Member Sign Up $60.00 plus $20.00 Materials Fee
    Non-member Sign Up $75.00 plus $20.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
   
FAB108: Injection Molding SBU

The Morgan injection molding machine enables one to inexpensively fabricate from a few to many hundreds of identical parts molded from a large variety of thermoplastic materials.

In this Safety and Basic Use (SBU) class, you will have the opportunity to fabricate several different plastic parts using molds that illustrate a variety of molding techniques. Once you have been completed this basic class, you will have the knowledge to safely operate the machine and set it up for your own mold and material.

Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

3 sessions currently scheduled:
    Injection Molding SBU Monday, 11/3/14 1:00 PM 3.0 Hours 4 SEATS TOTAL
3 SEATS LEFT
    * Member Sign Up $90.00 plus $5.00 Materials Fee
    Non-member Sign Up $115.00 plus $5.00 Materials Fee
    Injection Molding SBU Friday, 11/7/14 4:00 PM 3.0 Hours 4 SEATS TOTAL
3 SEATS LEFT
    * Member Sign Up $90.00 plus $5.00 Materials Fee
    Non-member Sign Up $115.00 plus $5.00 Materials Fee
    Injection Molding SBU Monday, 11/17/14 1:00 PM 3.0 Hours 4 SEATS TOTAL
4 SEATS LEFT
    * Member Sign Up $90.00 plus $5.00 Materials Fee
    Non-member Sign Up $115.00 plus $5.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
 LASER CUTTING (LAS)
 
   
LAS101: Laser Cutting & Etching SBU - Epilog

Learn how to use a laser cutter to cut, etch, and engrave designs in a variety of materials up to 24" x 18" and up to 3/8" thick in this Safety and Basic Use (SBU) class. Work with acrylic, wood, paper, cardboard, fabric, leather, and even chocolate! Using graphics software like Adobe Illustrator or CorelDRAW, cut intricate designs and engrave highly detailed images at the touch of a button. The sky is the limit with this simple and versatile tool.

Project: Etch a custom dog tag

Prerequisite(s): None. However, familiarity with graphics software will be helpful.

Equipment access: Laser cutter

Minimum age: 12 years

Supervision requirements: During class, all 12- to 15-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

When using the laser cutter outside of class time, 12- to 15-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

Safety: Closed-toed shoes are mandatory.

Passing this class allows you to use our standard Epilog Helix lasers; however it does not allow usage of the 120 watt Epilog Fusion laser. To use the Fusion, after passing this class please take our FREE half hour LAS199: Supplemental Epilog Fusion Course.

Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

4 sessions currently scheduled:
    Laser Cutting & Etching SBU - Epilog Monday, 11/3/14 2:00 PM 2.0 Hours 6 SEATS TOTAL
CLASS FULL
    Laser Cutting & Etching SBU - Epilog Wednesday, 11/12/14 2:00 PM 2.0 Hours 6 SEATS TOTAL
4 SEATS LEFT
    * Member Sign Up $60.00 plus $5.00 Materials Fee
    Non-member Sign Up $75.00 plus $5.00 Materials Fee
    Laser Cutting & Etching SBU - Epilog Saturday, 11/22/14 2:00 PM 2.0 Hours 6 SEATS TOTAL
6 SEATS LEFT
    * Member Sign Up $60.00 plus $5.00 Materials Fee
    Non-member Sign Up $75.00 plus $5.00 Materials Fee
    Laser Cutting & Etching SBU - Epilog Monday, 11/24/14 2:00 PM 2.0 Hours 6 SEATS TOTAL
6 SEATS LEFT
    * Member Sign Up $60.00 plus $5.00 Materials Fee
    Non-member Sign Up $75.00 plus $5.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
   
LAS199: Supplemental Epilog Fusion Course

Use the new Epilog Fusion Laser Cutter to cut, etch, and engrave materials as large as 32 by 20 inches. With twice the wattage of our standard lasers, you can cut thicker materials faster! This FREE supplement to the Laser Cutting & Etching SBU will teach you the capabilities of the Fusion laser, as well as the new, easier to use control interface.

Prerequisite(s): You must have taken and passed LAS101: Laser Cutting & Etching SBU - Epilog

Equipment access: Fusion Laser cutter

Minimum age: 12 years

Supervision requirements: During class, all 12- to 15-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

When using the laser cutter outside of class time, 12- to 15-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

Safety: Closed-toed shoes are mandatory.

10 sessions currently scheduled:
    Supplemental Epilog Fusion Course Monday, 11/3/14 12:00 PM 0.5 Hour 6 SEATS TOTAL
4 SEATS LEFT
    Member and non-member Sign Up FREE, No Materials Fee
    Supplemental Epilog Fusion Course Monday, 11/3/14 7:00 PM 0.5 Hour 6 SEATS TOTAL
6 SEATS LEFT
    Member and non-member Sign Up FREE, No Materials Fee
    Supplemental Epilog Fusion Course Tuesday, 11/4/14 12:00 PM 0.5 Hour 6 SEATS TOTAL
6 SEATS LEFT
    Member and non-member Sign Up FREE, No Materials Fee
    Supplemental Epilog Fusion Course Tuesday, 11/4/14 7:00 PM 0.5 Hour 6 SEATS TOTAL
6 SEATS LEFT
    Member and non-member Sign Up FREE, No Materials Fee
    Supplemental Epilog Fusion Course Wednesday, 11/5/14 12:00 PM 0.5 Hour 6 SEATS TOTAL
6 SEATS LEFT
    Member and non-member Sign Up FREE, No Materials Fee
    Supplemental Epilog Fusion Course Wednesday, 11/5/14 7:00 PM 0.5 Hour 6 SEATS TOTAL
5 SEATS LEFT
    Member and non-member Sign Up FREE, No Materials Fee
    Supplemental Epilog Fusion Course Thursday, 11/6/14 12:00 PM 0.5 Hour 6 SEATS TOTAL
6 SEATS LEFT
    Member and non-member Sign Up FREE, No Materials Fee
    Supplemental Epilog Fusion Course Thursday, 11/6/14 7:00 PM 0.5 Hour 6 SEATS TOTAL
6 SEATS LEFT
    Member and non-member Sign Up FREE, No Materials Fee
    Supplemental Epilog Fusion Course Friday, 11/7/14 12:00 PM 0.5 Hour 6 SEATS TOTAL
6 SEATS LEFT
    Member and non-member Sign Up FREE, No Materials Fee
    Supplemental Epilog Fusion Course Friday, 11/7/14 7:00 PM 0.5 Hour 6 SEATS TOTAL
6 SEATS LEFT
    Member and non-member Sign Up FREE, No Materials Fee
   
LAS201: Laser Engraver Rotary Attachment SBU - Epilog

Learn how to use the laser cutter’s rotary attachment in this Safety and Basic Use (SBU) class. The rotary attachment allows laser etching on cylindrical objects such as wine glasses, beer mugs, flashlights, bottles, and even drumsticks. Imagine the possibilities!

Project: Etch a design into a drinking glass

Prerequisite(s): LAS101 Laser Cutting and Etching SBU

Equipment access: Laser engraver rotary attachment

Minimum age: 12 years

Supervision requirements: During class, all 12- to 15-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

When using the laser rotary attachment outside of class time, 12- to 15-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

Safety: Closed-toed shoes are mandatory.

Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

2 sessions currently scheduled:
    Laser Engraver Rotary Attachment SBU - Epilog Saturday, 11/8/14 12:00 PM 2.0 Hours 3 SEATS TOTAL
3 SEATS LEFT
    * Member Sign Up $60.00 plus $5.00 Materials Fee
    Non-member Sign Up $75.00 plus $5.00 Materials Fee
    Laser Engraver Rotary Attachment SBU - Epilog Thursday, 11/13/14 2:00 PM 2.0 Hours 3 SEATS TOTAL
3 SEATS LEFT
    * Member Sign Up $60.00 plus $5.00 Materials Fee
    Non-member Sign Up $75.00 plus $5.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
 MACHINING (MAC)
 
   
MAC101: Milling Machine SBU

In this Safety and Basic Use (SBU) class, learn basic operations of the vertical milling machine to safely select speeds, change end mills, use the digital readout, and secure work needed to accurately machine parts. Explore the theory of how to successfully choose the correct end mill and speed setting. Work precisely with metal and plastics to cut, drill and surface parts.

Project: Aluminum business card holder

Prerequisite(s): None. However, MTL103, Basic Metal Shop is recommended.

Equipment access: Milling machine

Minimum age: 16

Supervision requirements: During class, all 16- and 17-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

When using the mill outside of class time, 16- and 17-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

Safety

  • Mandatory: Closed-toed shoes, eye protection, and short sleeves. Tie hair back or secure under a cap and remove all jewelry.

  • Advisable: Hearing protection


Materials fee: The materials fee includes materials for the class project, and an end mill for each student to keep. (Classes after 4/1/14)

Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

4 sessions currently scheduled:
    Milling Machine SBU Thursday, 11/6/14 7:00 PM 3.0 Hours 5 SEATS TOTAL
4 SEATS LEFT
    * Member Sign Up $90.00 plus $25.00 Materials Fee
    Non-member Sign Up $125.00 plus $25.00 Materials Fee
    Milling Machine SBU Monday, 11/10/14 6:00 PM 3.0 Hours 5 SEATS TOTAL
5 SEATS LEFT
    * Member Sign Up $90.00 plus $25.00 Materials Fee
    Non-member Sign Up $125.00 plus $25.00 Materials Fee
    Milling Machine SBU Monday, 11/17/14 11:30 AM 3.0 Hours 5 SEATS TOTAL
5 SEATS LEFT
    * Member Sign Up $90.00 plus $25.00 Materials Fee
    Non-member Sign Up $125.00 plus $25.00 Materials Fee
    Milling Machine SBU Wednesday, 11/19/14 6:30 PM 3.0 Hours 5 SEATS TOTAL
5 SEATS LEFT
    * Member Sign Up $90.00 plus $25.00 Materials Fee
    Non-member Sign Up $125.00 plus $25.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
   
MAC102: Metal Lathe SBU

The lathe is used to create detailed cylindrical or tapered objects in plastic or metal. In this Safety and Basic Use course (SBU), learn the basic operations of metal turning on the lathe to safely select speeds, select and change cutting tools, use the digital readout, and secure work to make accurate cuts. Explore the theory of how to choose the correct cutter and speed setting.

Project: Aluminum refrigerator magnet

Prerequisite(s): None. However, knowledge of basic metal shop tools is recommended

Equipment access: Metal lathe

Minimum age: 16

Supervision requirements: During class, all 16- and 17-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

When using the metal lathe outside of class time, 16- and 17-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

Safety

  • Mandatory: Closed-toed shoes, eye protection, and short sleeves. Tie hair back or secure under a cap and remove all jewelry.

  • Advisable: Hearing protection


Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

2 sessions currently scheduled:
    Metal Lathe SBU Tuesday, 11/4/14 4:00 PM 3.0 Hours 5 SEATS TOTAL
3 SEATS LEFT
    * Member Sign Up $90.00 plus $5.00 Materials Fee
    Non-member Sign Up $115.00 plus $5.00 Materials Fee
    Metal Lathe SBU Thursday, 11/20/14 4:00 PM 3.0 Hours 5 SEATS TOTAL
5 SEATS LEFT
    * Member Sign Up $90.00 plus $5.00 Materials Fee
    Non-member Sign Up $115.00 plus $5.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
   
MAC201: Advanced Milling Machine - Tramming and Precision

In this advanced skills class, learn the art of tramming, how to make sure the mill and vise are exactly plumb and parallel, and how to precisely square up work. Confidently use a dial test indicator, 1-2-3 block, fly cutter, and deburring stone. Leave with the skill to mill flat and square projects to a very high degree of accuracy. With practice and patience, become a more accurate machinist and competent mill user!

Project: Square an aluminum part

Prerequisite(s):

  • Required: MAC101: Milling Machine SBU

  • Recommended: At least 10 hours of mill experience


Minimum age: 16

Supervision requirements: All 16- to 17-year-olds must attend class with a parent or guardian and be supervised, while using the mill, by a parent or guardian who has passed the SBU.

Safety

  • Required: Closed-toed shoes, eye protection, and short sleeves. Tie hair back or secure under a cap and remove jewelry.

  • Recommended: Hearing protection


2 sessions currently scheduled:
    Advanced Milling Machine - Tramming and Precision Wednesday, 11/5/14 6:30 PM 2.0 Hours 4 SEATS TOTAL
3 SEATS LEFT
    * Member Sign Up $70.00 plus $5.00 Materials Fee
    Non-member Sign Up $90.00 plus $5.00 Materials Fee
    Advanced Milling Machine - Tramming and Precision Tuesday, 11/25/14 4:00 PM 2.0 Hours 4 SEATS TOTAL
4 SEATS LEFT
    * Member Sign Up $70.00 plus $5.00 Materials Fee
    Non-member Sign Up $90.00 plus $5.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
   
MAC202: Advanced Metal Lathe - Feeds, 4-Jaw Chuck and More Workholding

In this class, you will learn how to safely perform several advanced operations on the metal lathe.

You will learn to change out the chuck; center circular and square stock in the 4-jaw chuck; use a live center; turn between centers and mount stock between centers. You will also learn to use feed rates, a roughing pass and a finish pass to improve the overall look, feel and quality of your finished pieces.

Your instructor will cover a wide variety of in-class projects that are designed to help you establish these skills.

This is a great class for those looking to improve their overall level of comfort in the machine shop and metal lathe working skills.

Prerequisite: You MUST have successfully completed the Metal Lathe SBU in order to take this class.

1 session currently scheduled:
    Advanced Metal Lathe - Feeds, 4-Jaw Chuck and More Workholding Wednesday, 11/12/14 4:30 PM 2.0 Hours 4 SEATS TOTAL
4 SEATS LEFT
    * Member Sign Up $70.00 plus $10.00 Materials Fee
    Non-member Sign Up $90.00 plus $10.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
   
MAC205: Advanced Metal Lathe - Knurling and Threading

Using a metal lathe to create custom threads for bolts, nuts or any custom application can seem like a daunting and quite complex machining operation.

This class breaks down the process and clearly explains the concepts and techniques of threading. You will learn about the different types of tools used for threading, anatomy and nomenclature of threads and the step-by-step process to machining any kind of thread. We will also cover the process of knurling parts to create texture for gripping.

This class is a great way to learn a fundamental lathe skill-set and increase your overall comfort with lathes and what can be created with them.



You must have completed the Metal Lathe SBU to take this course.

2 sessions currently scheduled:
    Advanced Metal Lathe - Knurling and Threading Monday, 11/10/14 11:00 AM 2.0 Hours 5 SEATS TOTAL
4 SEATS LEFT
    * Member Sign Up $60.00 plus $10.00 Materials Fee
    Non-member Sign Up $75.00 plus $10.00 Materials Fee
    Advanced Metal Lathe - Knurling and Threading Tuesday, 11/18/14 4:00 PM 2.0 Hours 5 SEATS TOTAL
5 SEATS LEFT
    * Member Sign Up $60.00 plus $10.00 Materials Fee
    Non-member Sign Up $75.00 plus $10.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
 METAL SHOP (MTL)
 
   
MTL103: Basic Metal Shop SBU

In this Safety and Basic Use (SBU) class, learn to use the cutting and shaping tools most commonly needed when working with metal. The tools work best on materials at least 1/8” thick, but some will work on thinner material as well. These tools are designed to work with steel and aluminum. Get hands-on experience using the vertical and horizontal band saw, cold saw, drill press, pedestal grinder, and disc sander.

This class is the perfect companion to the mill, lathe and welding classes.

Project: Metal bottle opener

Prerequisite(s): None

Equipment access: Vertical and horizontal band saw, cold saw, drill press, pedestal grinder, and disc sander

Minimum age: 16

Supervision requirement: None

Safety
  • Mandatory: Closed-toed shoes, eye protection, and short sleeves. Pull back hair, no jewelry,no gloves.

  • Advisable: Hearing protection


Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

3 sessions currently scheduled:
    Basic Metal Shop SBU Monday, 11/3/14 3:00 PM 2.0 Hours 5 SEATS TOTAL
CLASS FULL
    Basic Metal Shop SBU Friday, 11/7/14 8:00 PM 2.0 Hours 5 SEATS TOTAL
4 SEATS LEFT
    * Member Sign Up $65.00 plus $10.00 Materials Fee
    Non-member Sign Up $80.00 plus $10.00 Materials Fee
    Basic Metal Shop SBU Wednesday, 11/19/14 4:00 PM 2.0 Hours 5 SEATS TOTAL
5 SEATS LEFT
    * Member Sign Up $65.00 plus $10.00 Materials Fee
    Non-member Sign Up $80.00 plus $10.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
   
MTL104: Sheet Metal Basics SBU

Learn to safely use the tools most commonly needed to work with sheet metal. Get first-hand experience using the hydraulic shear, turret punch, slitting shear, corner notcher, finger brake (also called a box brake or pan brake) and spot welder in this Safety and Basic Use (SBU) class. Gain the knowledge to shear (cut), fold, bend, and punch holes in sheet metal.

Project: Small sheet metal box

Prerequisite(s): None

Equipment access: Hydraulic shear, turret punch, slitting shear (hand shear) corner notcher, finger brake, and spot welder

Note: These tools cannot be used to make curved surfaces or work with metal thicker than 16 gauge mild steel or aluminum.

Minimum age: 12

Supervision requirements: During class, all 12- to 15-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

When using these tools outside of class time, 12- to 15-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

Safety

  • Mandatory: Closed-toed shoes, eye protection

  • Advised: Hearing protection


Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

2 sessions currently scheduled:
    Sheet Metal Basics SBU Sunday, 11/2/14 11:00 AM 2.0 Hours 5 SEATS TOTAL
2 SEATS LEFT
    * Member Sign Up $65.00 plus $10.00 Materials Fee
    Non-member Sign Up $80.00 plus $10.00 Materials Fee
    Sheet Metal Basics SBU Sunday, 11/23/14 1:30 PM 2.0 Hours 5 SEATS TOTAL
5 SEATS LEFT
    * Member Sign Up $65.00 plus $10.00 Materials Fee
    Non-member Sign Up $80.00 plus $10.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
   
MTL201: Sheet Metal - Organic Shapes SBU

Learn to safely work with sheet metal to form curved shapes in this Safety and Basic Use (SBU) class. Receive hands-on practice with the slip roll, English wheel, planishing hammer, metal shrinker and stretcher, Beverly shear, shot bags, and hammers. Practice these basics techniques and create motorcycle gas tanks, fenders, curved panels, and more!

Project: Turtle shell-shaped piece of aluminum with a beaded edge

Prerequisite(s): MTL104 Sheet Metal Basics SBU is recommended

Equipment access: Slip roll, English wheel, planishing hammer, metal shrinker and stretcher, Beverly shear, shot bags, and hammers. Note: These tools are not used to work with metal thicker than 16 gauge mild steel or aluminum.

Minimum age: 12

Supervision requirements: During class, all 12- to 15-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

When using these tools outside of class time, 12- to 15-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

Safety

  • Mandatory: Closed-toed shoes, eye protection

  • Advisable: Hearing protection


Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

2 sessions currently scheduled:
    Sheet Metal - Organic Shapes SBU Saturday, 11/1/14 10:30 AM 2.0 Hours 5 SEATS TOTAL
5 SEATS LEFT
    * Member Sign Up $65.00 plus $10.00 Materials Fee
    Non-member Sign Up $80.00 plus $10.00 Materials Fee
    Sheet Metal - Organic Shapes SBU Wednesday, 11/19/14 8:00 PM 2.0 Hours 5 SEATS TOTAL
4 SEATS LEFT
    * Member Sign Up $65.00 plus $10.00 Materials Fee
    Non-member Sign Up $80.00 plus $10.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
 RAPID PROTOTYPING (PRO)
 
   
PRO102: MakerBot Replicator 3D Printer SBU

Thanks to 3D printing, you can quickly and easily create a physical object from a computer model, literally printing the part as it goes. This is an easy way to prototype your parts before machining or injection molding.

In this class, you will learn how to import, prepare and print your three-dimensional parts using the MakerBot Replicator 3D printer. By the end of the class, you will have all the information and knowledge necessary to use this machine for all your 3D printing needs.

The class will print a small part that TechShop has designed.

Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

1 session currently scheduled:
    MakerBot Replicator 3D Printer SBU Friday, 11/21/14 2:00 PM 2.0 Hours 7 SEATS TOTAL
6 SEATS LEFT
    * Member Sign Up $60.00 plus $5.00 Materials Fee
    Non-member Sign Up $75.00 plus $5.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
 SOCIAL EVENTS (SOC)
 
   
SOC: TechShop is Closed for Thanksgiving

TechShop employees will be enjoying the holiday with their families. We hope you do, too!

1 session currently scheduled:
    TechShop is Closed for Thanksgiving Thursday, 11/27/14 9:00 AM 15.0 Hours 0 SEAT TOTAL
CLASS FULL
 SPECIAL INTEREST (SPI)
 
   
SPI201: Business Development Basics

Entrepreneur and investor, Gene Kirila, has launched three successful businesses over the past two decades.



Early in his entrepreneurial career, Gene started recording what worked and what didn’t. He repeated – and then refined – the proven tactics, from business development to sales strategy, and from intellectual property development to marketing. He hired experts to see if they could accelerate growth, and adjusted his system to incorporate validated practices.



The end result is a system born in the trenches, tested under both extreme crisis and extreme opportunities. Trep focuses on the critical elements that propel – or derail – the growth of a private company like yours. It focuses your attention on the details that matter most. It helps you run circles around the elephant-like giant companies that surround you, while keeping your company focused on what you do best.



Join Gene as he introduces you to the basics of business development.

There are currently no sessions of this class scheduled.
    Please Email Us to request more sessions of this class to be added to our schedule.
 
 STEAM (STEAM)
 
   
STEAM537: Youth Maker Session

Supervised making and design time for youth ages 8-17



This is a Multi-Day Course! Each course starts on the advertised start date. Please click on the sign up link to access the full dates of class meetings



In this course, youth will be free to work on projects of their own design while being supervised and assisted by TechShop youth education instructors. Students in this course will be supervised while using our design lab classroom, CNC Laser cutters, 3D printers as well as various handheld tools. They will be encouraged to explore various design and fabrication methods with the guidance of their instructors to allow for creative and open making.

*Disclaimer This course does not offer safety and basic use instruction of the CNC Lasers, 3D printers or any tools that require a safety and basic use course. Students who have completed TechShop SBU courses or TechShop Summer of Creation courses are eligible to use tools in the TechShop Youth Maker Sessions.

4 sessions currently scheduled:
    Youth Maker Session
(Youth Maker Session)
Wednesday, 11/5/14 3:30 PM 3.0 Hours 12 SEATS TOTAL
12 SEATS LEFT
    Member and non-member Sign Up $150.00 plus $50.00 Materials Fee
    Youth Maker Session
(Youth Maker Session)
Thursday, 11/6/14 3:30 PM 3.0 Hours 12 SEATS TOTAL
12 SEATS LEFT
    Member and non-member Sign Up $150.00 plus $50.00 Materials Fee
    Youth Maker Session
(Youth Maker Session)
Wednesday, 12/3/14 3:30 PM 3.0 Hours 12 SEATS TOTAL
12 SEATS LEFT
    Member and non-member Sign Up $150.00 plus $50.00 Materials Fee
    Youth Maker Session
(Youth Maker Session)
Thursday, 12/4/14 3:30 PM 3.0 Hours 12 SEATS TOTAL
12 SEATS LEFT
    Member and non-member Sign Up $150.00 plus $50.00 Materials Fee
   
STEAM538: Youth Laser Cutting and Etching SBU - Epilog

THIS COURSE IS FOR YOUTH AGES 8-17 ONLY!



Learn how to use a laser cutter to cut, etch, and engrave designs in a variety of materials up to 24" x 18" and up to 3/8" thick in this Safety and Basic Use (SBU) class. Work with acrylic, wood, paper, cardboard, fabric, leather, and even chocolate! Using graphics software like Adobe Illustrator or CorelDRAW, cut intricate designs and engrave highly detailed images at the touch of a button. The sky is the limit with this simple and versatile tool.

Project: Etch a custom dog tag

Prerequisite(s): None!

Equipment access: Laser cutter

Minimum age: 8 years

Supervision requirements: When using the laser cutter outside of class time, 8-12 yr olds may only use equipment during "Supervised Maker Sessions." (Classes and course being taught and supervised by TechShop Youth Education Instructors) 12-15 year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU when using the tool outside of "Supervised Maker Sessions."

Safety: Closed-toed shoes are mandatory.

Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

1 session currently scheduled:
    Youth Laser Cutting and Etching SBU - Epilog
(Youth Laser Cutting and Etching)
Tuesday, 12/2/14 3:30 PM 2.0 Hours 6 SEATS TOTAL
5 SEATS LEFT
    Member and non-member Sign Up $60.00 plus $5.00 Materials Fee
   
STEAM539: Youth MakerBot Replicator 3D Printer SBU

THIS COURSE IS FOR YOUTH AGES 8-17 ONLY!



Thanks to 3D printing, you can quickly and easily create a physical object from a computer model, literally printing the part as it goes. This is an easy way to prototype your parts before machining or injection molding.

In this class, you will learn how to import, prepare and print your three-dimensional parts using the MakerBot Replicator 3D printer. By the end of the class, you will have all the information and knowledge necessary to use this machine for all your 3D printing needs.

The class will print a small part that TechShop has designed.

Prerequisite(s): None!

Equipment access: 3D printer

Minimum age: 8 years

Supervision requirements: When using the 3D printer outside of class time, 8-12 yr olds may only use equipment during "Supervised Maker Sessions." (Classes and course being taught and supervised by TechShop Youth Education Instructors) 12-15 year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU when using the tool outside of "Supervised Maker Sessions."

Safety: Closed-toed shoes are mandatory.





Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

1 session currently scheduled:
    Youth MakerBot Replicator 3D Printer SBU
(Youth MakerBot Replicator 3D Printer)
Tuesday, 12/16/14 3:30 PM 2.0 Hours 6 SEATS TOTAL
4 SEATS LEFT
    Member and non-member Sign Up $60.00 plus $5.00 Materials Fee
   
STEAM544: Youth Laser Engraver Rotary Attachment SBU - Epilog

Learn how to use the laser cutter’s rotary attachment in this Safety and Basic Use (SBU) class. The rotary attachment allows laser etching on cylindrical objects such as wine glasses, beer mugs, flashlights, bottles, and even drumsticks. Imagine the possibilities!

Project: Etch a design into a drinking glass

Prerequisite(s): LAS101 Laser Cutting and Etching SBU

Equipment access: Laser engraver rotary attachment

Minimum age: 8 years

Supervision requirements: When using the laser cutter and laser rotary outside of class time, 8-12 yr olds may only use equipment during "Supervised Maker Sessions." (Classes and course being taught and supervised by TechShop Youth Education Instructors) 12-15 year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU when using the tool outside of "Supervised Maker Sessions."

Safety: Closed-toed shoes are mandatory.



Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

2 sessions currently scheduled:
    Youth Laser Engraver Rotary Attachment SBU - Epilog
(Youth Laser Engraver Rotary Attachment)
Tuesday, 11/4/14 3:30 PM 2.0 Hours 6 SEATS TOTAL
6 SEATS LEFT
    Member and non-member Sign Up $60.00 plus $5.00 Materials Fee
    Youth Laser Engraver Rotary Attachment SBU - Epilog
(Youth Laser Engraver Rotary Attachment)
Tuesday, 12/9/14 3:30 PM 2.0 Hours 6 SEATS TOTAL
5 SEATS LEFT
    Member and non-member Sign Up $60.00 plus $5.00 Materials Fee
   
STEAM545: Youth Basic Sewing Machine SBU

THIS COURSE IS FOR YOUTH AGES 8-17 ONLY!



Learn how to use a laser cutter to cut, etch, and engrave designs in a variety of materials up to 24" x 18" and up to 3/8" thick in this Safety and Basic Use (SBU) class. Work with acrylic, wood, paper, cardboard, fabric, leather, and even chocolate! Using graphics software like Adobe Illustrator or CorelDRAW, cut intricate designs and engrave highly detailed images at the touch of a button. The sky is the limit with this simple and versatile tool.

Project: Pocket bag

Prerequisite(s): None!

Equipment access: Sewing machine

Minimum age: 8 years

Supervision requirements: When using the sewing machines outside of class time, 8-12 yr olds may only use equipment during "Supervised Maker Sessions." (Classes and course being taught and supervised by TechShop Youth Education Instructors) 12-15 year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU when using the tool outside of "Supervised Maker Sessions."

Safety: Closed-toed shoes are mandatory.

Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

1 session currently scheduled:
    Youth Basic Sewing Machine SBU
(Youth Basic Sewing Machine)
Tuesday, 11/11/14 3:30 PM 2.0 Hours 6 SEATS TOTAL
6 SEATS LEFT
    Member and non-member Sign Up $45.00 plus $5.00 Materials Fee
   
STEAM546: Youth Vinyl Cutter SBU

THIS COURSE IS FOR YOUTH AGES 8-17 ONLY!



Learn to use the computer-controlled vinyl cutter in this Safety and Basic Use (SBU) class. Import vector (outline) designs from graphic software such as Adobe Illustrator and CorelDRAW into FlexiStarter, the software used to control the vinyl cutter. Next, use TechShop's CNC vinyl cutter to cut adhesive vinyl sheet into professional looking signage or ready-to-apply paint masking. This is a great tool for making screens for silkscreen printing, too!

Project: Vinyl Sticker

Prerequisite(s): None!

Equipment access: Vinyl Cutter

Minimum age: 8 years

Supervision requirements: When using the vinyl cutter outside of class time, 8-12 yr olds may only use equipment during "Supervised Maker Sessions." (Classes and course being taught and supervised by TechShop Youth Education Instructors) 12-15 year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU when using the tool outside of "Supervised Maker Sessions."

Safety: Closed-toed shoes are mandatory.

Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

1 session currently scheduled:
    Youth Vinyl Cutter SBU
(Youth Vinyl Cutter)
Tuesday, 11/18/14 3:30 PM 2.0 Hours 6 SEATS TOTAL
6 SEATS LEFT
    Member and non-member Sign Up $45.00 plus $5.00 Materials Fee
   
STEAM542: Parent and Child Maker Session

THIS COURSE IS FOR YOUTH AGES 8-17 AND THEIR PARENTS/GUARDIANS ONLY!

Supervised making and design for youth 8+ and Parents



In this course, youth and parents will be free to work on projects of their own design while being supervised and assisted by a TechShop youth education instructor. Students in this course will be supervised while using our design lab classroom, CNC Laser cutters, 3D printers as well as various handheld tools. They will be encouraged to explore various design and fabrication methods with the guidance of their instructors to allow for creative and open making.

*Disclaimer This course does not offer safety and basic use instruction of the CNC Lasers, 3D printers or any tools that require a safety and basic use course. Students who have completed TechShop SBU courses or TechShop Summer of Creation courses are eligible to use tools in this course

7 sessions currently scheduled:
    Parent and Child Maker Session
(Parent and Child Maker Session)
Saturday, 11/1/14 12:30 PM 3.0 Hours 5 SEATS TOTAL
5 SEATS LEFT
    * Member Sign Up $100.00, No Materials Fee
    Non-member Sign Up $125.00, No Materials Fee
    Parent and Child Maker Session
(Parent and Child Maker Session)
Saturday, 11/8/14 12:30 PM 3.0 Hours 5 SEATS TOTAL
5 SEATS LEFT
    * Member Sign Up $100.00, No Materials Fee
    Non-member Sign Up $125.00, No Materials Fee
    Parent and Child Maker Session
(Parent and Child Maker Session)
Saturday, 11/15/14 12:30 PM 3.0 Hours 5 SEATS TOTAL
5 SEATS LEFT
    * Member Sign Up $100.00, No Materials Fee
    Non-member Sign Up $125.00, No Materials Fee
    Parent and Child Maker Session
(Parent and Child Maker Session)
Saturday, 11/22/14 12:30 PM 3.0 Hours 5 SEATS TOTAL
5 SEATS LEFT
    * Member Sign Up $100.00, No Materials Fee
    Non-member Sign Up $125.00, No Materials Fee
    Parent and Child Maker Session
(Parent and Child Maker Session)
Saturday, 12/6/14 12:30 PM 3.0 Hours 5 SEATS TOTAL
5 SEATS LEFT
    * Member Sign Up $100.00, No Materials Fee
    Non-member Sign Up $125.00, No Materials Fee
    Parent and Child Maker Session
(Parent and Child Maker Session)
Saturday, 12/13/14 12:30 PM 3.0 Hours 5 SEATS TOTAL
5 SEATS LEFT
    * Member Sign Up $100.00, No Materials Fee
    Non-member Sign Up $125.00, No Materials Fee
    Parent and Child Maker Session
(Parent and Child Maker Session)
Saturday, 12/20/14 12:30 PM 3.0 Hours 5 SEATS TOTAL
5 SEATS LEFT
    * Member Sign Up $100.00, No Materials Fee
    Non-member Sign Up $125.00, No Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
   
STEAM540: Parent and Child Laser Cutting and Etching SBU - Epilog

THIS COURSE IS FOR YOUTH AGES 8-17 ONLY AND PARENT/GUARDIANS



Learn how to use a laser cutter to cut, etch, and engrave designs in a variety of materials up to 24" x 18" and up to 3/8" thick in this Safety and Basic Use (SBU) class. Work with acrylic, wood, paper, cardboard, fabric, leather, and even chocolate! Using graphics software like Adobe Illustrator or CorelDRAW, cut intricate designs and engrave highly detailed images at the touch of a button. The sky is the limit with this simple and versatile tool.

Each slot in this course is for 1 Parent/Guardian and 1 child. Both Students will be certified on our tools. To sign up, use the website to enroll the Parent/Guardian and pay, and then call the TechShop Front Desk to enroll your child.

Project: Etch a custom dog tag

Prerequisite(s): None!

Equipment access: Laser cutter

Minimum age: 8 years. 18 for Parent/Guardian

Supervision requirements: When using the laser cutter outside of class time, 8-12 yr olds may only use equipment during "Supervised Maker Sessions." (Classes and course being taught and supervised by TechShop Youth Education Instructors) 12-15 year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU when using the tool outside of "Supervised Maker Sessions."

Safety: Closed-toed shoes are mandatory

Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

3 sessions currently scheduled:
    Parent and Child Laser Cutting and Etching SBU - Epilog
(Parent and Child Laser Cutting and Etching)
Saturday, 11/15/14 10:00 AM 2.0 Hours 3 SEATS TOTAL
2 SEATS LEFT
    * Member Sign Up $120.00 plus $10.00 Materials Fee
    Non-member Sign Up $150.00 plus $10.00 Materials Fee
    Parent and Child Laser Cutting and Etching SBU - Epilog
(Parent and Child Laser Cutting and Etching)
Saturday, 12/6/14 10:00 AM 2.0 Hours 3 SEATS TOTAL
3 SEATS LEFT
    * Member Sign Up $120.00 plus $10.00 Materials Fee
    Non-member Sign Up $150.00 plus $10.00 Materials Fee
    Parent and Child Laser Cutting and Etching SBU - Epilog
(Parent and Child Laser Cutting and Etching)
Saturday, 12/20/14 10:00 AM 2.0 Hours 3 SEATS TOTAL
3 SEATS LEFT
    * Member Sign Up $120.00 plus $10.00 Materials Fee
    Non-member Sign Up $150.00 plus $10.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
   
STEAM541: Parent and Child MakerBot Replicator 3D Printer SBU

THIS COURSE IS FOR YOUTH AGES 8-17 ONLY AND PARENT/GUARDIANS



Thanks to 3D printing, you can quickly and easily create a physical object from a computer model, literally printing the part as it goes. This is an easy way to prototype your parts before machining or injection molding.

In this class, you will learn how to import, prepare and print your three-dimensional parts using the MakerBot Replicator 3D printer. By the end of the class, you will have all the information and knowledge necessary to use this machine for all your 3D printing needs.

The class will print a small part that TechShop has designed.

Each slot in this course is for 1 Parent/Guardian and 1 child. Both Students will be certified on our tools. To sign up, use the website to enroll the Parent/Guardian and pay, and then call the TechShop Front Desk to enroll your child.

Prerequisite(s): None!

Equipment access: 3D printer

Minimum age: 8 years. 18 for Parent/Guardian

Supervision requirements: When using the 3D printer outside of class time, 8-12 yr olds may only use equipment during "Supervised Maker Sessions." (Classes and course being taught and supervised by TechShop Youth Education Instructors) 12-15 year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU when using the tool outside of "Supervised Maker Sessions."

Safety: Closed-toed shoes are mandatory.



Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

2 sessions currently scheduled:
    Parent and Child MakerBot Replicator 3D Printer SBU
(Parent and Child MakerBot Replicator 3D Printer)
Saturday, 11/1/14 10:00 AM 2.0 Hours 3 SEATS TOTAL
2 SEATS LEFT
    * Member Sign Up $120.00 plus $10.00 Materials Fee
    Non-member Sign Up $150.00 plus $10.00 Materials Fee
    Parent and Child MakerBot Replicator 3D Printer SBU
(Parent and Child MakerBot Replicator 3D Printer)
Saturday, 12/13/14 10:00 AM 2.0 Hours 3 SEATS TOTAL
3 SEATS LEFT
    * Member Sign Up $120.00 plus $10.00 Materials Fee
    Non-member Sign Up $150.00 plus $10.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
   
STEAM548: Parent and Child Laser Engraver Rotary Attachment SBU - Epilog

THIS COURSE IS FOR YOUTH AGES 8-17 ONLY AND PARENT/GUARDIANS



Learn how to use the laser cutter’s rotary attachment in this Safety and Basic Use (SBU) class. The rotary attachment allows laser etching on cylindrical objects such as wine glasses, beer mugs, flashlights, bottles, and even drumsticks. Imagine the possibilities!

Each slot in this course is for 1 Parent/Guardian and 1 child. Both Students will be certified on our tools. To sign up, use the website to enroll the Parent/Guardian and pay, and then call the TechShop Front Desk to enroll your child.

Project: Etch a design into a drinking glass!

Prerequisite(s): LAS101 Laser Cutting and Etching SBU

Equipment access: Laser engraver rotary attachment

Minimum age: 8 years. 18 for Parent/Guardian

Supervision requirements: When using the laser cutter machines outside of class time, 8-12 yr olds may only use equipment during "Supervised Maker Sessions." (Classes and course being taught and supervised by TechShop Youth Education Instructors) 12-15 year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU when using the tool outside of "Supervised Maker Sessions."

Safety: Closed-toed shoes are mandatory

Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

1 session currently scheduled:
    Parent and Child Laser Engraver Rotary Attachment SBU - Epilog
(Parent and Child Laser Engraver Rotary Attachment)
Saturday, 11/22/14 10:00 AM 2.0 Hours 3 SEATS TOTAL
3 SEATS LEFT
    * Member Sign Up $120.00 plus $10.00 Materials Fee
    Non-member Sign Up $150.00 plus $10.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
   
STEAM549: Parent and Child Vinyl Cutter SBU

THIS COURSE IS FOR YOUTH AGES 8-17 ONLY AND PARENT/GUARDIANS



Learn to use the computer-controlled vinyl cutter in this Safety and Basic Use (SBU) class. Import vector (outline) designs from graphic software such as Adobe Illustrator and CorelDRAW into FlexiStarter, the software used to control the vinyl cutter. Next, use TechShop's CNC vinyl cutter to cut adhesive vinyl sheet into professional looking signage or ready-to-apply paint masking. This is a great tool for making screens for silkscreen printing, too!

Each slot in this course is for 1 Parent/Guardian and 1 child. Both Students will be certified on our tools. To sign up, use the website to enroll the Parent/Guardian and pay, and then call the TechShop Front Desk to enroll your child.

Project: Vinyl Stickers!

Prerequisite(s): None!

Equipment access: Vinyl Cutter

Minimum age: 8 years. 18 for Parent/Guardian

Supervision requirements: When using the vinyl cutter outside of class time, 8-12 yr olds may only use equipment during "Supervised Maker Sessions." (Classes and course being taught and supervised by TechShop Youth Education Instructors) 12-15 year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU when using the tool outside of "Supervised Maker Sessions."

Safety: Closed-toed shoes are mandatory

Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

1 session currently scheduled:
    Parent and Child Vinyl Cutter SBU
(Parent and Child Vinyl Cutter)
Saturday, 11/8/14 10:00 AM 2.0 Hours 3 SEATS TOTAL
3 SEATS LEFT
    * Member Sign Up $90.00 plus $10.00 Materials Fee
    Non-member Sign Up $110.00 plus $10.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
 TEXTILES (TXL)
 
   
TXL101: Basic Sewing Machine SBU

In this Safety and Basic Use (SBU) class, learn to use a sewing machine. Acquire skills to correctly thread machine, fill and place the bobbin, and change the foot. Also learn to sew straight, zig-zag, basting, and other specialty stitches. This machine sews through regular weight fabric but not heavy duty materials like leather or thick canvas. Go on to create messenger bags, rocket parachutes, clothing, plushies, sails, costumes, and more!

Project: Pocket bag

Prerequisites: None

Equipment access: Sewing machine

Minimum age: 12

Supervision requirements: During class, all 12- to 15-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

When using the sewing machine outside of class time, 12- to 15-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

Safety: Closed-toed shoes are required.

Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

1 session currently scheduled:
    Basic Sewing Machine SBU Wednesday, 11/5/14 7:30 PM 1.5 Hours 4 SEATS TOTAL
1 SEAT LEFT
    * Member Sign Up $45.00 plus $5.00 Materials Fee
    Non-member Sign Up $55.00 plus $5.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
   
TXL103: CNC Embroiderer SBU

In this Safety and Basic Use (SBU) class, learn to create custom embroidery designs with the intuitive and easy-to-use Janome embroidery machine. Take part in several demos and become familiar with hooping methods, needles, threading, several types of stabilizers, and more. See how to create digitized stitches based on monogramming and logo art as well as clipart-style designs. New to digitizing? Take TXL204: Digitizer CNC Embroiderer Software next!

Project: Embroidered patch

Prerequisites: None

Equipment access: Embroidery machine

Minimum age: 12

Supervision requirements: During class, all 12- to 15-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

When using the embroidery machine outside of class time, 12- to 15-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

Safety: Closed-toed shoes are required.

Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

1 session currently scheduled:
    CNC Embroiderer SBU Wednesday, 11/12/14 7:30 PM 2.0 Hours 6 SEATS TOTAL
5 SEATS LEFT
    * Member Sign Up $60.00 plus $5.00 Materials Fee
    Non-member Sign Up $75.00 plus $5.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
   
TXL105: Industrial Serger Sewing Machine SBU

In this Safety and Basic Use (SBU) class, learn to use the Juki four-thread industrial serger sewing machine. Get hands-on serger experience using overlock stitching to create high quality, soft-feeling seams and fine rolled hems. Take advantage of this powerful machine to sew and hem heavy, layered materials like canvas and leather. Expect to increase productivity after learning this efficient machine.

Project: Small pocket bag

Prerequisites: None

Equipment access: Industrial serger sewing machine

Minimum age: 12

Supervision requirements: All 12- to 15-year-olds must attend class with a parent or guardian and be supervised, while using the Industrial serger sewing machine, by a parent or guardian who has passed the SBU.

Safety: Closed-toed shoes are required.



Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

1 session currently scheduled:
    Industrial Serger Sewing Machine SBU Wednesday, 11/19/14 7:30 PM 1.5 Hours 4 SEATS TOTAL
3 SEATS LEFT
    * Member Sign Up $45.00 plus $5.00 Materials Fee
    Non-member Sign Up $55.00 plus $5.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
 WELDING / HOTSHOP (WLD)
 
   
WLD101: TIG Welding SBU

Welding is the process of fusing materials together. Learn how to use the basic TIG (tungsten inert gas) welding equipment in this Safety and Basic Use (SBU) class. Get started creating quality weld beads on mild steel. While this class practices on thin steel, the TIG welder is capable of welding material up to 1/2” thick.

With extensive practice, TIG welding can be used with a wide variety of different metals, producing a very pure, precise, and attractive weld.

Project: No project; just guided practice with an instructor.

Prerequisite(s): None. However, successful completion of MTL103: Basic Metal Shop will provide access to the cutting and grinding tools needed for working with metal.

Equipment access: TIG welder

Minimum age: 12

Supervision requirements: During class, all 12- to 15-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

When using the welder outside of class time, 12- to 15-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

Safety
  • Mandatory: Closed-toed shoes made of natural fibers or leather, natural fiber or leather long sleeved shirt, natural fiber or leather long pants. Welding hood, gloves and jacket provided by TechShop.

  • Advised: Leather welding jacket, leather welding pants, leather boots, respirator and hearing protection.



Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

3 sessions currently scheduled:
    TIG Welding SBU Tuesday, 11/11/14 6:00 PM 2.0 Hours 4 SEATS TOTAL
3 SEATS LEFT
    * Member Sign Up $55.00 plus $5.00 Materials Fee
    Non-member Sign Up $70.00 plus $5.00 Materials Fee
    TIG Welding SBU Saturday, 11/15/14 11:00 AM 2.0 Hours 4 SEATS TOTAL
4 SEATS LEFT
    * Member Sign Up $55.00 plus $5.00 Materials Fee
    Non-member Sign Up $70.00 plus $5.00 Materials Fee
    TIG Welding SBU Friday, 11/21/14 4:00 PM 2.0 Hours 4 SEATS TOTAL
4 SEATS LEFT
    * Member Sign Up $55.00 plus $5.00 Materials Fee
    Non-member Sign Up $70.00 plus $5.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
   
WLD102: MIG Welding SBU

Welding is the process of fusing materials together. In this Safety and Basic Use (SBU) class, learn to use a basic metal inert gas (MIG) welder with solid wire and shielding gas to create quality weld beads on steel up to 1/2" thick. This semi-automatic method of welding (continuous consumable wire feed), also called GMAW (gas metal arc welding) and wire feed welding, offers versatility, speed, and quality. About as easy as welding gets, this is a great place for the beginner to start.

Project: Guided practice with an instructor

Prerequisites: None. However, MTL103: Basic Metal Shop is recommended.

Equipment access: MIG welder

Minimum age: 12

Supervision requirements: During class, all 12- to 15-year-old students must be accompanied by a parent or guardian who is also enrolled in the class.

When using the welder outside of class time, 12- to 15-year-old members must be accompanied and supervised by a parent or guardian who has passed the SBU.

Safety
  • Mandatory: Closed-toed shoes made of natural fibers or leather, natural fiber or leather long sleeved shirt, natural fiber or leather long pants. Welding hood, gloves and jacket provided by TechShop.

  • Advised: Leather welding jacket, leather welding pants, leather boots, respirator and hearing protection.



Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

3 sessions currently scheduled:
    MIG Welding SBU Monday, 11/10/14 3:30 PM 2.0 Hours 5 SEATS TOTAL
3 SEATS LEFT
    * Member Sign Up $55.00 plus $5.00 Materials Fee
    Non-member Sign Up $70.00 plus $5.00 Materials Fee
    MIG Welding SBU Thursday, 11/20/14 2:00 PM 2.0 Hours 5 SEATS TOTAL
5 SEATS LEFT
    * Member Sign Up $55.00 plus $5.00 Materials Fee
    Non-member Sign Up $70.00 plus $5.00 Materials Fee
    MIG Welding SBU Saturday, 11/29/14 11:00 AM 2.0 Hours 5 SEATS TOTAL
5 SEATS LEFT
    * Member Sign Up $55.00 plus $5.00 Materials Fee
    Non-member Sign Up $70.00 plus $5.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
   
WLD201: TIG Welding 2 - Aluminum

After completing the TIG Safety and Basic Use (SBU) class, you can try your skills in a different material. Aluminum has characteristics that require specific equipment setup, metal preparation and torch operation.

In this class, you will practice specific joints and improve weld bead quality under the guidance of an instructor. Lap, butt, corner and fillet welds will all be discussed and individual students will perform at their own rates. Emphasis will be placed on visual inspection of welds and heat zone theory, so that you gain a better understanding of what a quality weld joint really looks like.

For your safety, you must wear long pants and a long-sleeved shirt in natural fibers in the Hot Shop, and remember to always wear closed-toed shoes at TechShop.

Prerequisite: Successful completion of the TIG Welding SBU.

2 sessions currently scheduled:
    TIG Welding 2 - Aluminum Thursday, 11/13/14 4:30 PM 2.0 Hours 4 SEATS TOTAL
4 SEATS LEFT
    * Member Sign Up $80.00 plus $10.00 Materials Fee
    Non-member Sign Up $100.00 plus $10.00 Materials Fee
    TIG Welding 2 - Aluminum Saturday, 11/29/14 2:30 PM 2.0 Hours 4 SEATS TOTAL
4 SEATS LEFT
    * Member Sign Up $80.00 plus $10.00 Materials Fee
    Non-member Sign Up $100.00 plus $10.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
   
WLD202: MIG Welding 2 - Make Better Welds

After completing the MIG SBU class, you can practice specific joints and improve weld bead quality under guidance of an instructor.

In this class, many different joints and out of position welding will be discussed, and emphasis will be placed on visual inspection of welds and heat zone theory, so that you gain a better understanding of what a quality weld joint really looks like. Participants will perform at their own rates.

For your safety, long pants and long-sleeved shirts in natural fibers are required in the Hot Shop, and remember to always wear closed-toed shoes at TechShop.

Prerequisite: Successful completion of the MIG Welding SBU. It is also important to have practiced your MIG skills prior to this class.

2 sessions currently scheduled:
    MIG Welding 2 - Make Better Welds Monday, 11/17/14 5:30 PM 2.0 Hours 4 SEATS TOTAL
4 SEATS LEFT
    * Member Sign Up $80.00 plus $5.00 Materials Fee
    Non-member Sign Up $100.00 plus $5.00 Materials Fee
    MIG Welding 2 - Make Better Welds Tuesday, 11/25/14 7:00 PM 2.0 Hours 4 SEATS TOTAL
4 SEATS LEFT
    * Member Sign Up $80.00 plus $5.00 Materials Fee
    Non-member Sign Up $100.00 plus $5.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
 WOODSHOP (WOD)
 
   
WOD101: Woodshop SBU

Learn the fundamentals of woodworking and how to safely operate the core woodshop tools in this Safety and Basic Use (SBU) class. Get practical, hands-on experience using a SawStop table saw, sliding compound miter saw, drill press, band saw, and belt and disk sanders. Learn to make straight cuts (rip and crosscut), mitered cuts, curved cuts, smooth edges, and drill holes.

Project: Build a small wooden shelf

Prerequisites: None

Equipment access: Sliding compound miter saw, table saw, wood drill press, wood band saw, and belt and disc sanders

Minimum age: 16

Supervision requirements: None

Safety

  • Mandatory: Closed-toed shoes, eye protection, short sleeves

  • Advised: Hearing protection, particle filter or dust mask


Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

5 sessions currently scheduled:
    Woodshop SBU Saturday, 11/1/14 11:00 AM 2.5 Hours 5 SEATS TOTAL
CLASS FULL
    Woodshop SBU Sunday, 11/9/14 2:00 PM 2.5 Hours 5 SEATS TOTAL
3 SEATS LEFT
    * Member Sign Up $75.00 plus $10.00 Materials Fee
    Non-member Sign Up $95.00 plus $10.00 Materials Fee
    Woodshop SBU Thursday, 11/20/14 8:00 PM 2.5 Hours 5 SEATS TOTAL
5 SEATS LEFT
    * Member Sign Up $75.00 plus $10.00 Materials Fee
    Non-member Sign Up $95.00 plus $10.00 Materials Fee
    Woodshop SBU Saturday, 11/22/14 4:00 PM 2.5 Hours 5 SEATS TOTAL
5 SEATS LEFT
    * Member Sign Up $75.00 plus $10.00 Materials Fee
    Non-member Sign Up $95.00 plus $10.00 Materials Fee
    Woodshop SBU Sunday, 11/23/14 10:00 AM 2.5 Hours 5 SEATS TOTAL
4 SEATS LEFT
    * Member Sign Up $75.00 plus $10.00 Materials Fee
    Non-member Sign Up $95.00 plus $10.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.
   
WOD201: Jointer, Planer and Table Router SBU

In this Safety and Basic Use (SBU) class, learn proper techniques and how to safely operate the jointer, planer, and table-mounted router. Use these woodworking tools to turn rough lumber into finished boards (achieve precise thickness, square edges and flat surfaces) as well as create complex profiles for edge finishing and joinery operations. Say goodbye to the constraints of lumberyard wood and the high price of mail order wood. Say hello to affordable custom woodworking projects!

Project: Perform various operations on a piece of wood

Prerequisites: WOD 101: Basic Woodshop SBU

Equipment access: Table-mounted router, jointer, planer

Minimum age: 16

Supervision requirements: None

Safety

  • Mandatory: Closed-toed shoes, eye protection, short sleeves

  • Advisable: Hearing protection, particle filter or dust mask, face shield


Once you take and successfully pass this class, you can use this equipment for your projects whenever you work at TechShop as a member!

2 sessions currently scheduled:
    Jointer, Planer and Table Router SBU Sunday, 11/16/14 11:00 AM 2.0 Hours 4 SEATS TOTAL
1 SEAT LEFT
    * Member Sign Up $60.00 plus $10.00 Materials Fee
    Non-member Sign Up $75.00 plus $10.00 Materials Fee
    Jointer, Planer and Table Router SBU Saturday, 11/22/14 12:30 PM 2.0 Hours 4 SEATS TOTAL
4 SEATS LEFT
    * Member Sign Up $60.00 plus $10.00 Materials Fee
    Non-member Sign Up $75.00 plus $10.00 Materials Fee
    * Membership is verified at the time of the class session. Be sure to bring your badge.